You do not need to configure link-local addresses for your tunnel.
In the absence of routers, a host can generate only link-local addresses.
After verification, the link-local address can be assigned to an interface.
この確認が終わったら、リンクローカルアドレスをインタフェースに割り当てることができます。
Such nodes have multiple link-local addresses assigned to the same interface.
このようなノードには、同じインタフェースに複数のリンクローカルアドレスが割り当てられる。
For all autoconfiguration types, a link-local address is always configured.
いずれの自動構成でも、リンク ローカル アドレスは常に構成されます。
No additional packet exchange is needed to resolve the router's link-local address.
ルーターのリンクローカルアドレスを解決するために、これ以外のパケットを交換する必要はありません。
This is required for link-local destination addresses.
これは、リンク ローカル宛先アドレスの場合に必要になります。
This capability also improves packet delivery over nodes that change their link-local addresses.
この機能はまた、自分のリンクローカルアドレスを変更するノードを経由するパケット伝送も改善します。
The following example shows the format of the link-local address.
次に、リンクローカルアドレスのフォーマットの例を示します。
The link-local unicast address can be used only on the local network link.
リンクローカルユニキャストアドレスを使用できるのは、ローカルネットワークリンク上だけです。
The link-local address is initialized for the interface.
インターフェイスのアドレスはこのリンク ローカル アドレスで初期化されます。
At that point, you must manually configure the link-local address of the interface.
その時点で、インタフェースのリンクローカルアドレスは手動で設定する必要があります。
Please use global unicast addresses which will also suffice for their link-local counterpart.
リンク ローカルの通信先でも使用できる、グローバルなユニキャスト アドレスを使用してください。