For example, assemblers take over from humans troublesome address calculations as well as conversions from machine instruction names to instruction codes.
たとえば、アセンブラは、面倒なアドレス計算や、機械命令の名前から命令コードへの変換を人間に代わって遂行してくれる。
The compiler detected code in a Fortran program that could be vectorized and generated the applicable machine instruction code using the M-180 IAP's vector instructions.
FORTRANプログラム中のベクトル化可能部分をコンパイラが検出して,M-180IAPベクトル命令を使った機械命令コードが生成された.
This NaCl vulnerability, tracked as CVE-2015-0565, has been mitigated by modifying the NaCl so it does not allow execution of the clflush (cache line flush) machine instruction, which was previously believed to be required for constructing an effective row hammer attack.
この NaCl の脆弱性(CVE-2015-0565)は、効果的なロウハンマー攻撃を組み立てるために必要だと以前は考えられていた clflush機械語命令(キャッシュラインをフラッシュする) ) を許さないように NaCl を修正することで緩和された 。
Each machine instruction activity is specific to a machine.
マシン インストラクション アクティビティはそれぞれの工作機械専用です。
Inserts a machine instruction in the program
加工命令をプログラムに挿入します
After a machine change, if you edit the machine instruction activity, you receive warning messages about compatibility issues, should any apply.
工作機械を変更した後で、マシン インストラクション アクティビティを編集すると、互換性に関する警告メッセージが必要に応じて表示されます。
To create machine instruction activity, assign a machine to the part operation.
工作機械の命令アクティビティーを作成するには、パート オペレーションに工作機械を割り当てます。
Inserts a machine instruction
加工命令を挿入します
Once selected, the axis remains locked during the simulation until another machine instruction is encountered.
軸を選択すると、他のマシン インストラクションが開始されるまで、シミュレーションの間はその軸はロックされたままとなります。
The role of a machine instruction activity is to allow a parallel or peripheral axis machine to be used in a simulation. You can lock one of the parallel axes and specify the other axes that can move freely.
マシン インストラクション アクティビティにより、平行軸/周辺軸工作機械をシミュレーションで使用できるようになります。平行軸のいずれかをロックして、自由に移動できる他の軸を指定できます。
It enabled programming using 24 machine instructions with the following two methods: (1) Wired Program This method was designed based on the wiring technique used for patch board of telephone exchange, which enabled to do easy programming in conjunction with equipment such as a paper card reader and a printer. A patch board consists of 22 lines x 14 rows of sockets called hubs, and allows a program comprising up to 16 steps to be were classified into program-step hubs, program-suppression hubs, operation hubs, etc., and several hubs were connected by wires to create a machine instruction.
(1)ワイヤリング制御方式 この方式は紙カードリーダーやプリンタなどの機器と連動して,簡単にプログラム処理ができるように電子交換機のパッチボードのワイヤリング技術をもとに考案されたものである. パッチボードは22行×14列のハブと呼ばれるソケットが並んだものであり,最大で16ステップのプログラムを組めるようになっている.ハブにはプログラムステップハブ,プログラムサプレッションハブ,オペレーションハブなどの区分があり,各ハブをワイヤで接続し,機械命令を作り出すものであった. これらの操作により,紙テープまたはカードから数値を読み取り,簡単な計算をしてプリンタに印字する処理ができるものであった.
For example, you could sample the state of the current thread, the state of the CPU, or the current machine instruction.
たとえば、現在のスレッドの状態、CPU の状態、現在のマシンの命令などの標本を収集できます。
Partial Simulation is not possible with a machine instruction activity because no tool path is created.
部分的なシミュレーションでは、ツール パスが作成されないため、マシン インストラクション アクティビティを使用して実行することはできません。