There are restrictions on the use conditions for the maximum operating pressure
最高使用圧力については使用条件に制限あり。
Tube wall thickness during maximum operating pressure
最高使用圧力時のチューブ肉厚
Rotork: FAQ - Operating and design pressure differences What is the difference between maximum operating pressure and design pressure?
Rotork: FAQ-動作圧力と設計圧力の違い 最大動作圧力と最大設計圧力の違いは何ですか?
The Maximum Operating Pressure (MOP) is pressure that generates the torque used to engineer the mechanical loaded parts of the is the one required to produce the Maximum Operating Structural Torque (MAST) of the actuator.
最大動作圧力(MOP)とは、アクチュエータの機械的負荷がかかる部分を設計するのに必要なトルクを発生させる圧力ですが、これは、アクチュエータの最大動作構成トルク(MAST)を生み出すのに必要となります。
The criteria used in determining the hazard potential are maximum operating pressure, volume or fluid group.
危険の度合いを判定するのに使用される基準は、最大作動圧、体積、または液体区分です。
It expels air from the steam system. It exhausts the air automatically at a slightly lower temperature than the saturated steam temperature at any pressure from the light vacuum state up to the maximum operating pressure.
蒸気システムから空気を追放。軽い真空状態から最高使用圧力までどの圧力においても飽和蒸気温度よりわずかに低い温度で自動的に空気を排出
Uses a wax type thermo-element on the thermal part, can support up to maximum operating pressure of 0.35 MPa, and is used for various heating radiators compact, lightweight and low operating noise
感熱部にワックス式サーモエレメントを使用し、最高使用圧力0.35MPaまで対応でき、各種暖房用放熱器に利用小型・軽量で作動音が静か
Adopts a bellows thermostatic system, can support up to maximum operating pressure of 0.2 MPa, and is used for various heating radiators. Compact, lightweight and low operating noise
ベローズサーモスタチック式を採用し最高使用圧力0.2MPaまで対応でき、各種暖房用放熱器に利用小型・軽量で作動音が静か
Dissemination hydraulic coupler with the maximum operating pressure of 20.6 MPa. With less pressure loss, it is suitable for hydraulic equipment
最高使用圧力20.6MPaの普及型油圧用カプラ。圧力損失も少なく油圧機器に適応
Supports a maximum operating pressure of 24.5 MPa
24.5MPaまでの最高使用圧力に対応高温用
It supports the maximum operating pressure up to 6.9 MPa
6.9MPaまでの最高使用圧力に対応
Maximum Operating Pressure during Vacuum
真空時最高使用圧力
The hose and hose end should not be rated to a pressure less than the maximum operating pressure system.
ホースおよびホースエンドは、最大作動圧力システムよりも低い圧力に定格することはできません)。