There is no "correct" way to constantly display the current (or total) line (or column) number on the mode line in Emacs 18, or to display the line numbers next to the lines like vi can.
Emacs 18 版では 現在の行 (または列) をモードラインに常に表示させる "正しい" 方法はありません.
While a connection is protected by SSH, a picture of a lock is shown in the mode line.
SSH で通信が保護されている場合、モードラインに錠前の絵が表示されます。
It's better to get your mode line right.
したがって、モード行を正しくする方がいいでしょう。
Just two more considerations are necessary: you need an odd total number of vertical lines (the last number in your mode line), and when you specify the "interlace" flag, the actual vertical frame rate for your monitor doubles.
2 つだけ追加の検討が必要です。 まず、垂直線の総数(モード行の最後の数値)を奇数にしなければなりません。 次に、"interlace" フラグを指定した時、モニタに対する実際の垂直フレーム周波数が倍になることです。
If you have a relatively new monitor (1996 or later) that supports the PnP specification, there is a chance that you use the read-edid program to ask the monitor for its stastics and compute a mode line for you.
PnP 仕様に対応している比較的新しいモニタ(1996 年以降の製品)をお使いであれば、edid 読み取りプログラムを使ってモニタに基本特性値を問い合わせ、モード行を自動的に計算できる可能性があります。
Find the Resize mode line among the available parameters and select the appropriate method from the drop-down list.
使用可能なパラメータの中からサイズ変更モード行を探し、ドロップダウンリストから適切な方法を選択します。
The XFree86 distribution now includes good facilities for configuring most standard combinations; this document is mainly useful if you are tuning a custom mode line for a high-performance monitor or very unusual hardware.
現在の XFree86 の配布物は、ほとんどの標準的な組み合わせに対応して設定できる素晴らしい機能を持っています。 したがって、この文書は主に、モード行を高性能なモニタやとても変わったハードウェア向けにカスタマイズして調整したい場合に役立ちます。
O The dot clock section contains only the dot clock (what we've called DCF) field of the video mode line.
ドットクロックセクションには、ビデオモード行の項目に DCF と呼んでいたドットクロックのみを書きます。
You'll find that what I've called the status bar is usually referred to as the mode line in Emacs related documentation.
私がステータスバーと呼んでいるものが、Emacs の関連文書では、普通、モードラインと呼ばれていることに気付くでしょう。
How to compose a mode line for your card/monitor combination under XFree86.
XFree86 において、カードやモニターの組み合わせてあわせてモード行を作成する方法。 日本語訳),
When this word is finished, the' ' mark in the right side of the mode line in Summary mode disappears.
全体に非表示の属性が付くと、 Summary mode のモードラインの右端にある' ' マークが消えます。
74-84 Hz 75 Hz 84- Hz 85 Hz Thus, if you use a mode line that for example has a 70Hz refresh rate you will only get a 60Hz refresh rate in actuality.
したがって、例えば 70Hz のリフレッシュレートを持つモード行を使う場合は、実際には 60Hz のリフレッシュレートしか得られない。
The refresh rate used is derived from the normal mode line according to the following table: Mode-line refresh rate Used refresh rate 0-74 Hz 60 Hz
リフレッシュレートは通常のモード行から以下の表を使って得られる:モード行のリフレッシュレート使われるリフレッシュレート0-74 Hz60 Hz74-84 Hz75 Hz84- Hz85 Hz