Carries higher bandwidth than multimode fiber, but requires a light source with a narrow spectral width.
マルチモードファイバよりも高い帯域幅を伝送しますが、スペクトル幅が狭い光源が必要です。
Further, when the normalized frequency is sufficiently large, the number of modes that can be propagated in the step index type multimode fiber can be approximated by the following formula.
また、正規化周波数が十分に大きいとき、ステップインデックス型マルチモードファイバの伝搬可能なモード数は下記の式で近似できる。
Maximum distance depends on the type of multimode fiber used.
最大距離は、使用するマルチモードファイバーのタイプによって異なります。
If the distance is less than a couple of miles, multimode fiber will work well.
距離が数マイル未満の場合は、マルチモードファイバーが適切に機能します。
In addition to the research and development of single-mode fiber lasers, we are also focusing on the development of new products and technologies to support the improvement of performances, functions and costs of continuous-wave high-power multimode fiber lasers used in metal cutting and welding, and pulse fiber lasers used in marking and micromachining.
シングルモードファイバレーザの研究開発以外にも、金属の切断や溶接に用いられる連続波高出力マルチモードファイバレーザ、マーキングや微細加工に用いられるパルス発振ファイバレーザの性能・機能の向上やコストダウンを支える技術開発、新製品開発にも力を入れています。
Research is going on worldwide in the field of multicore fibers or multimode fiber transmission as a next-generation technology for increasing the transmission capacity per optical fiber.
光ファイバ1本当たりの伝送容量を拡大する次世代技術として、マルチコアファイバやマルチモードファイバ伝送が世界的に研究されています。
The at least one laser light source (11) includes a multimode fiber light source, or a broad stripe semiconductor laser light source where the vertical direction of a stripe structure is arranged in parallel with the scanning direction, and an exit pupil in the thickness direction perpendicular to the scanning direction is formed at at least one position on the side face of the light guide plate (17).
少なくとも1つのレーザ光源(11)は、マルチモードファイバ光源、又はストライプ構造の垂直方向が走査方向と平行に配置されたブロードストライプ型半導体レーザ光源を含み、導光板(17)の側面上の少なくとも1箇所に、走査方向と垂直な厚み方向の射出瞳が形成される。
Should I install single-mode or multimode fiber?
シングルモードまたはマルチモードファイバーをインストールする必要がありますか? これはアプリケーションによって異なります。
We offer customized fiber wires which includes single mode fiber optic cable and multimode fiber which is for long distance and local area network communication, the fiber cable is comply with tensile strength, crush test, impact test, and cable bending, compound flow, water penetration, temperature cycling under IEC 60794 standard.
シングルモード光ファイバーケーブルとマルチモードファイバーを含むカスタマイズされたファイバーワイヤーを提供します。 これは長距離およびローカルエリアネットワーク通信用であり、ファイバーケーブルは引張強度、クラッシュテスト、衝撃テスト、ケーブル曲げ、複合フロー、水の浸透に準拠しています。
The results of analysis using this technology show that inserting an intermediary optical waveguide with a core width of 25 μm, or half the width of the core in a multimode fiber that an optical signal passes through, has the effect of suppressing the transmission in low-speed propagation modes (propagation mode 3 in Figure 1) and reducing the modal dispersion (Figure 2).
この技術を用いて解析した結果、光が通過するコアの幅がマルチモードファイバーの2分の1である25マイクロメートル(μm)の中継導波路を挿入することで、速度の遅い伝搬モード(図1の伝搬モード3)の発生を抑え、モード分散が低減できることがわかりました(図2 ) 。
As a result of fabricating the prototype optical transmitter, the company was able to confirm that, even when used with conventional multimode fiber, at transmission rates of 25 Gbps, it doubled the maximum transmission distance to 200 meters.
光送信器を製作した結果、従来のマルチモードファイバーを用いて、伝送速度25Gbpsで従来の2倍となる200mの伝送が確認できました。
As well, silica based optical fiber can be divided into single mode fiber (SMF) which has only one mode of propagation within the fiber, and multimode fiber (MMF) which has multiple modes of propagation.
また、石英系光ファイバーにおいては、ファイバー中を伝搬できるモードが一つしかないシングルモードファイバー(SMF)と複数のモードが伝搬できるマルチモードファイバー(MMF)に大別されます。
Figure 1: Problems with long-distance transmissions in multimode fiber About the Technology Fujitsu has developed technology that reduces modal dispersion in existing multimode fibers by inserting an intermediary optical waveguide between the lens and optical fiber to transmit the optical signal.
図1 マルチモードファイバーにおける長距離化の課題 開発した技術 今回、レンズから光ファイバーまで光を中継して伝える中継光導波路を挿入することで、既存のマルチモードファイバーを用いて、モード分散を低減させる技術を開発しました。