Vertaling van "node1" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
On node1, perform the database recovery, then open the database on that node
node1で、データベース・リカバリを実行してから、そのノードでデータベースを開きます。
This command lists all cluster resources that are currently owned by node1 on the local cluster.
このコマンドは、ローカル クラスター内の node1 によって現在所有されているすべてのクラスター リソースを一覧表示します。
This command lists the clustered services and applications (resource groups) that are currently owned by node1 in the local cluster.
このコマンドは、ローカル クラスター内の node1 によって現在所有されているクラスター化されたサービスまたはアプリケーション (リソース グループ) を一覧表示します。
This command instructs the NLB driver on node1 to reload all its settings.
このコマンドは、すべての設定を再度読み込むように、node1 上の NLB ドライバーに指示します。
This command changes the persist suspend on reboot setting on node1 to TRUE.
このコマンドは、node1 のリブート時の維持の中断設定を TRUE に変更します。
This command changes the handling priority of the given port rule for node1 to 4. This is applicable for port rules with Single mode.
このコマンドは、node1 の所定ポート規則に対する処理の優先順位を 4 に変更します。これは Single モードのポート規則に対して適用できます。
Expand Step 4: The Pods in Node1 are completed, so it becomes idle and is scaled down.
拡大する ステップ 4: Node1 の Pod が完了したので、アイドル状態になってスケールダウンされます。
If you require a heterogeneous cluster with nodes that have diverse hardware configurations (for example, if Node1 has four processors with 8 GB of RAM while Node2 has two processors with 2 GB of RAM), Red Hat recommends that you create an initial proof-of-concept cluster to ensure that you encounter no surprises during production.
さまざまなハードウェア構成のノードで構成される不均一なクラスターが必要な場合 (たとえば、Node1 に 8 GB の RAM を持つ 4 つのプロセッサーがあり、Node2 には 2 GB の RAM を持つ 2 つのプロセッサーがある場合)、運用中に予期しない問題が発生しない事を確認するために、初期の概念実証クラスターを作成する事を Red Hat は推奨します。
This command sets the weight for the specified port rule on node1 to 25. This is applicable for port rules using the Multiple host.
このコマンドは、node1 上の指定したポート規則について負荷配分を 25 に設定します。Multiple ホストのポート規則に対して使用します。
For example, if there are four access nodes on the primary cluster and the nodename aliases for the nodes are defined as Node1, Node2, Node3, and Node4, then type
たとえば、プライマリ・クラスタに4つのアクセス・ノードが存在し、それらのノードのノード名エイリアスがNode1、Node2、Node3、Node4として定義されている場合は、次のように入力します。
The following sample connection string creates an EMC Centera media service that connects to the Node1 and Node2 access nodes of the EMC Centera device by using the Profile1.pea profile
次に示す接続文字列の例では、Profile1.peaプロファイルを使用してEMC CenteraデバイスのNode1およびNode2アクセス・ノードに接続するEMC Centeraメディア・サービスを作成します。
This command moves the Cluster Shared Volume called Cluster Disk 3 to node1.
このコマンドは、Cluster Disk 3 というクラスター共有ボリュームを node1 に移動します。
Note that ASM is not stopped on node1 because node1 is the target of the restore and ASM must be running on that node in order for Replication Manager to proceed.
node1はリストアのターゲットであり、Replication Managerが続行するためにはそのノードでASMが実行されている必要があるため、node1ではASMが停止されないことに注意してください。