Vertaling van "non-SSL" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The default non-SSL port associated with this configuration set entry.
このコンフィギュレーション・セット・エントリに関連付けられたデフォルトの非SSLポートです。
The non-SSL port number of this configuration set.
このコンフィギュレーション・セットの非SSLポート番号。
Please be aware that your personal information is not transmitted with encryption if non-SSL communication systems are used.
非SSL通信方式の場合、お客様の個人データの暗号化は行われません。
For example, if bind authentications are performed over a non-SSL connection, the password is sent over the wire in the clear.
たとえば、仮に非SSL接続を通じてバインド認証を行うと、パスワードがクリア・テキストとして送信されます。
Used for non-SSL connection.
非SSL接続に使用する。
Displays the login timeout for the server's plain-text (non-SSL) port, in seconds. This is the maximum amount of time allowed for a new connection to establish. A value of 0 indicates there is no maximum. The value must be equal to or greater than 0.
サーバーのプレーン・テキスト(非SSL)ポートのログイン・タイムアウトが秒単位で表示されます。これは、確立する新規接続に許可された最大時間です。値が0の場合は、最大時間がないことを意味します。値は0以上である必要があります。
If your application serves from both SSL and non-SSL protocols, then you might have problems with sessions being lost.
SSL と 非 SSL の両方のプロトコルで アプリケーションを動かす場合、セッション消失の問題が発生するかも知れません。
For example, if bind authentications are performed over a non-SSL connection, the LDAP administrator password is sent over the network unencrypted.
たとえば、仮に非SSL接続を通じてバインド認証を行うと、LDAP管理者パスワードが暗号化されずにネットワークを介して送信されます。
The non-SSL and SSL port number configured for this instance in its configuration entry
構成エントリで、このインスタンスに構成されている非SSLおよびSSLのポート番号
Webmasters should make sure not to mix non-SSL contents on SSL pages.
サイト運営者は SSL ページに非 SSL コンテンツを混在させないよう注意しましょう。
SSL load balancer should terminate SSL traffic and forward unencrypted traffic to the back-end servers using the equivalent non-SSL protocol.
SSLアクセラレーション。ロード・バランサは、SSLトラフィックを停止し、同等の非SSLプロトコルを使用しているバックエンド・サーバーに暗号化されていないトラフィックを転送する必要があります。
Using Ldp over an encrypted, non-SSL connection
暗号化された非 SSL 接続経由で Ldp を使用する
SSL settings should only be adjusted after you have properly deployed the appliance on your LAN in non-SSL mode.
SSL設定は、非SSLモードのLANにアプライアンスを適切に展開した後で調整する必要があります。