The added wheelbase length and overall width made for increased legroom and shoulder space than the previous model.
ホイールベースと全幅の拡大により、先代モデルよりも足元と肩周りの空間が拡げられた。
Also, the width of front fender was extended (overall width got also wider) and slits to let the air out were created at the top of fenders.
また、フロントフェンダーの幅も広くなり(全幅も拡大)、フェンダー上部のエア抜きスリットが付けられた。
Each of the sets of skulls is climbing together to measure the overall width.
頭蓋骨のそれぞれは、全体の幅を測定するために一緒に登っています。
Milling ends In the same way, we saw the remaining billets in the same way, and then we fold them together and check the overall width at both ends of the shield.
ミリングエンド 同様に、残りのビレットを同じ方法で見ました、そして、それからそれらをまとめてシールドの両端の全体の幅を確認します。
A film unwound from this roll has a total width of deformed parts extending in the width direction for the film of 10% or smaller based on the overall width of the film.
このロール状物から巻きだされたフィルムでは、その幅方向に存在するフィルムの歪み部分の合計幅が、フィルム全幅の10%以下である。
Not to mention the practicality of hanging a coat, the overall width is as large as 71 cm, so it looks like an object hung on the wall when not in use.
コート掛けなどの実用性はもちろん、全幅が71cmと大きいので使っていない間は壁に掛けてあるオブジェのようにも見えます。
Total length 14 m, overall width 2.8 m, height 2.3 m, in order to make the baking machine completed one of this magnitude, for employees 20 people make up over a period of 3 months, cost down and speed up challenge it. They are exploring for solving problems such as to start initiatives such as outsourcing some of the work.
全長14メートル、全幅2.8メートル、高さ2.3メートルの同焼成機を1台完成させるのには、社員20名が3ヶ月間かけて作り上げるため、コストダウン・スピードアップが課題であったが、一部外注化などの取り組みを開始するなど課題解決のために模索している。
If there is a need to rotate the TV by more than 75-80 degrees, it is necessary that the full departure of the bracket bar (distance a) was at least half of the overall width of the TV.
ブロックの回転、ブロックの移動、スロープ、スロープの移動、テレビを75~80度以上回転させる必要がある場合は、ブラケットバー(距離A)の逸脱がテレビの全幅の少なくとも半分であることが必要である。
Overall length, overall width is large than the Nimitz-class aircraft carrier.
空想上の空母で、全長・全幅はミニッツ級空母より大型です。
Later incarnations of the format (e.g. in the DOS debugger DEBUG) changed the space between the 8th and 9th byte to a dash without changing the overall width.
DOSデバッガDEBUGなどでは、DUMPのフォーマットを継承したが、全体の幅を変えずに8バイト目と9バイト目の間のスペースをダッシュに変更した。
They immediately take them away from the overall width.
彼らはすぐにそれらを全体的な幅から離れて取り除きます。
It is suggested that, where possible, extra stock be allowed to the overall width and length.
可能であれば、幅と長さ全体に余材部を設けることを推奨します。
The positions of the holes are not affected by changes in the overall width of the plate.
穴の位置はプレートの全体幅の変更には影響されません。