Download for Windows Premium
Publiciteit
performance problem might exist

Examples with "performance problem might exist" and their translation in Japans

We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
If you notice an unexpected spike in this value that is sustained through standard workload hours, then a memory performance problem might exist.
標準のワークロード時に予期しないスパイクが発生しこの値が取り消される場合、メモリー・パフォーマンスに問題がある場合があります。
In this example, memory utilization is near, but does not exceed, the warning threshold value (99 percent) from 4:00 p.m. to 11:00 p.m., so an alert is not you notice an unexpected spike in this value that is sustained through normal workload hours, then a memory performance problem might exist.
この例では、午後4時から午後11時の間、メモリーの使用率が警告のしきい値に近付きましたが、超えてはいません(99%)。このため、アラートは生成されませんでした。通常のワークロードの時間帯で維持されるこの値に予期しないスパイクを発見した場合、メモリーのパフォーマンスに問題がある可能性があります。
In this example, an alert is not generated because a threshold is not defined. If you notice an unexpected spike in this value that is sustained through normal workload hours, as is the case in this example from 2:00 p.m. to 4:00 p.m., then a disk I/O performance problem might exist and should be investigated.
この例ではしきい値が定義されていないため、アラートは生成されません。この例のように午後2時から午後4時までの通常のワークロードの時間帯で維持される値に予期せぬスパイクを発見した場合、ディスクI/Oパフォーマンスに問題がある可能性があり、調査が必要です。

Andere resultaten

In order to determine if a performance problem exists, a baseline must be established to compare to a specific set of computer, network, and applications components.
パフォーマンスの問題が存在するかどうかを判断するには、特定のコンピュータのセット、ネットワーク、アプリケーション・コンポーネントの比較対象となるベースラインを確定する必要があります。
There are many areas to investigate to identify where a performance problem exists; you must consider all aspects of the application environment, including SAN and communications networks.
パフォーマンス上の問題が存在する場所を特定するために調べる領域は多数あり、SANおよび通信ネットワークを含めたアプリケーション環境のすべての側面を考慮する必要があります。
In this example, the CPU utilization crossed the critical threshold value at 11:31 p.m., so an alert for CPU utilization is generated to indicate that a CPU performance problem may exist. If you notice an unexpected spike in this value that is sustained through normal workload hours, then the CPU performance problem should be investigated.
この例では、午後11時31分にCPU使用率が限界のしきい値を超過しました。このため、CPUのパフォーマンスに問題がある可能性があることを示すCPU使用率のアラートが生成されました。通常のワークロードの時間帯で維持される値に予期せぬスパイクを発見した場合、CPUのパフォーマンスの問題を調査する必要があります。
One reason for running ADDM manually is to analyze a time period longer than one ADDM analysis period. For example, you may want to analyze database performance in a full workday by analyzing 8 consecutive hours of activity. One technique is to analyze each of the individual ADDM analyses within this 8-hour period. However, this approach may become complicated if performance problems exist for only part of the 8-hour period, because they may appear in only some of the individual ADDM analyses. Alternatively, you can run ADDM manually with a pair of AWR snapshots that encompass the 8-hour period. In this case, ADDM will identify the most critical performance problems in the entire time period.
ADDMを手動で実行する理由は、1度のADDMの分析期間より長い時間間隔を分析するからです。たとえば、データベース・アクティビティを8時間連続して分析することで、一日のすべてのデータベースのパフォーマンスを分析する場合です。これを行う方法の1つはこの8時間の個々のADDM分析をそれぞれ分析することです。ただし、8時間の内の一部にのみパフォーマンスの問題が存在していた場合、個々のADDM分析の一部にしか表示されないため、分析が複雑になります。または、8時間に対応したAWRスナップショットのペアを使用してADDMを手動で実行できます。これによりADDMは全時間間隔における重大なパフォーマンスの問題のほとんどを識別します。
Identifying a Memory Problem with the DevTools Timeline The first step in solving any performance problem is to prove that the problem exists, create a reproducible test, and take a baseline measurement of the problem.
DevToolsのタイムラインを用いたメモリ問題調査 すべてのパフォーマンス問題に関して言えることですが、まず最初にすべきことは、問題の存在自体を証明すべく、再現性のあるテスト手順を確立し、現状の計測結果を取得することです。
For example, you may notice significant performance degradation that did not exist in the previous ADDM analysis period, and the next ADDM analysis is not scheduled to run for another 30 minutes. In this case, you may want to run ADDM manually before the next scheduled ADDM analysis to immediately identify and resolve the performance problem.
たとえば、前のADDM分析期間にはなかった重大なパフォーマンスの低下を発見したが、次のADDM分析を30分以内に実行するスケジュールが設定されていないことがあります。この場合、次にスケジュール設定されたADDM分析の前に手動でADDMを実行してすぐにパフォーマンスの問題を識別し、解決します。
Performance problems generally result from a lack of throughput, unacceptable user or job response time, or both. The problem might be localized to specific application modules, or it might span the entire system. Before looking at any database or operating system statistics, it is crucial to get feedback from the most important components of the system: the users of the system and the people ultimately paying for the application. Getting feedback from users makes determining the performance goal easier, and improved performance can be measured in terms of real business goals, rather than system statistics.
一般的に、パフォーマンスの問題はスループットの不足、ユーザーやジョブのレスポンス時間の異常の原因になります。問題の原因は特定のアプリケーションのモジュールである場合も、システム全体である場合もあります。データベースまたはオペレーティング・システムの統計を確認する前に、問題が発生しているシステムおよびアプリケーションのユーザーからフィードバックを収集することが不可欠です。ユーザーからのフィードバックは、パフォーマンス目標の決定に役立ちます。また、パフォーマンスの改善はシステムの統計よりも実際のビジネス目標の方が測定基準として優れています。
By default, ADDM runs every hour to analyze snapshots taken by AWR during this period. In some cases you may notice performance degradation that did not exist in the previous ADDM analysis period, or a sudden spike in database activity on the Performance page, as described in Monitoring Real-Time Database Performance. If the next ADDM analysis is not scheduled to run for 30 minutes, then you can run ADDM manually to identify and resolve the performance problem.
デフォルトでは、ADDMを1時間ごとに実行して、この期間中にAWRのスナップショットを分析します。場合によっては、ADDMを手動で実行して既存のデータベースを分析できます。たとえば、以前のADDM分析期間にはなかったパフォーマンスの診断、またはデータベースのパフォーマンスのリアルタイムの監視で説明されているように、≪パフォーマンス|Performance|emdw≫・ページのデータベース・アクティビティでの突然のスパイクを通知できます。次のADDM分析が30分以内に実行するようにスケジュールされていない場合、ADDMを手動で実行し、パフォーマンスの問題を識別して解決する必要があります。
You can maximize how resources are used in your system by ensuring that operations run in parallel whenever possible. Any database operation would run faster if it were not constrained by a resource at any point in time. The operation may be constrained by CPU resources, I/O capacity, memory, or interconnection traffic (in a cluster). To improve the performance of database operations, you focus on the performance problem and try to eliminate it (so that the problem might shift to another resource). Oracle Database provides functions to optimize the use of available resources, but also to avoid using unnecessary resources.
可能な場合にパラレルで操作を実行すると、システムでのリソースの使用を最大化できます。特定の時点でリソースによる制限がない場合、データベース操作をより速く実行できます。操作はCPUリソース、I/O容量、メモリーまたは(クラスタ内の)相互接続のトラフィックによって制限される場合があります。データベース操作のパフォーマンスを向上させるには、パフォーマンスの問題に焦点を当て、その問題を排除する必要があります(問題が他のリソースに移行する可能性を考慮し、排除する必要があります)。Oracle Databaseでは、使用可能なリソースの使用を最大化する機能を提供し、また不要なリソースの使用も回避します。
This problem might have something to do with the software update we installed.
この不具合は、インストールしたソフトのアップデートと何か関係があるかもしれません。
Er zijn geen resultaten gevonden voor deze term.
Ga naar Premium voor toegang tot miljoenen vertaalvoorbeelden, onbeperkt woorden opslaan en leren, zonder advertenties.
Woord & uitdrukking van de dag
Afbeelding van de dag
wings: feathered limbs used for flying
Ontdek het woord
Publiciteit

Resultaten: 928. Exact: 3. Verstreken tijd: 59 ms.