Vertaling van "performs feedback control" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
フィードバック制御を行い
フィードバック制御を行う
フィードバック制御する
As I mentioned in the first episode, the servo motor detects the rotational speed of a brushless DC motor or AC motor, and performs feedback control so that the motor shaft rotates at the speed set by the servo amplifier. ◆ Rotational direction This is information on which direction (clockwise or counterclockwise) the motor shaft has rotated.
The controller (37) performs feedback control and thereby determines the fuel injection amount such that in the stoichiometric driving mode the equivalence ratio value as calculated from the parameters reaches a target value which is set such that a three-way purification reaction occurs in an under-engine catalyst.
This device for controlling an automatic transmission is provided with: a lock-up clutch control means that performs feedback control causing the actual slip quantity of a lock-up clutch (8) to match a target slip quantity; and a zero slip control means that, on the basis of a zero slip request at a time of no transmission shifting, causes the lock-up clutch (8) to be in a zero slip state immediately before the occurrence of a slip.
The spindle control circuit (4) performs feedback control on the rotation speed of a spindle motor (3) so as to bring the focal point follow-up bias signal close to zero.
While the brakes are being applied, the on-board device performs feedback control to make the train decelerate as close to the braking pattern as possible.
The body control section performs feedback control of each fan motor so that its detection rotation speed coincides with a set rotation speed based on a rotation speed detected at the detecting section.
In addition, as the load current increase, the voltage declines, and the control circuit performs feedback control in order to restore the voltage to a set level by increasing the pulse width.
The controller (7) is holding the route of blood vessels as three-dimensional route data and performs feedback control on the currents to be supplied to the plurality of electromagnets (3, 4, 5) and the drive signal to be supplied to the bed drive motor (11) based on the deviation of the current position of the magnetic particle holder (8) being detected by the position sensor (6) from a target position.
In order to start an internal combustion engine (2) by cranking the engine with an electric motor, this internal combustion engine start-up control device performs feedback control by feeding intake air quantities of the internal combustion engine back to a target intake air quantity, learns feedback control correction quantities, and performs, in parallel with the feedback control, learning control using learning values that have been learned.
This fluoroscopic processing device is provided with: an image information generation unit that generates one frame of still image information on the basis of a digital gradient signal that is in accordance with the amount of radiation received at each pixel, and continuously combines the still image information of a plurality of frames to generate moving picture information; a region-of-interest setting unit that sets a portion of an image indicated by the moving picture information as a region of interest; a control unit that performs feedback control of the set value of radiation energy at a predetermined control cycle in a manner so that the computed value of the gradient signal that is a portion of the still image information of at least one frame becomes a value in a predetermined range; and an adjustment unit that adjusts the gradient signal corresponding to a region of non-interest in a manner so that the degree of change of the gradient signal resulting from the feedback control is less in the region of non-interest than the region of interest.
The control unit (10) performs feedback control of the switching element (Q1) in a manner so that the voltage supplied to the voltage divider circuits becomes uniform.
The power source control circuit is provided with a first transistor wherein a collector is connected with the direct current power source and an emitter is connected with the amplification circuit for discharging current; an error amplifier, which is connected with a base of the first transistor at an output edge and performs feedback control so as to keep the difference between a prescribed reference potential and a first transistor emitter potential constant; and a current intake second transistor wherein the emitter and the base are connected common to the first transistor and the collector is grounded.
The controller (30) samples a secondary side signal in a second cycle, samples a primary side signal in a first cycle shorter than the second cycle, and performs feedback control of a control signal so that a predetermined signal from the secondary side rectifier circuit (40) becomes constant, by estimating the secondary side signal corresponding to the timing of the most recently sampled primary side signal, on the basis of the secondary side signal, the primary side signal when the secondary side signal was sampled, and the most recently sampled primary side signal.
Er worden alleen voorbeelden gegeven om u te helpen het woord of de woordcombinatie waarop u hebt gezocht, te vertalen. Deze worden niet door ons geselecteerd of gevalideerd en kunnen ongepaste taal bevatten. Wij vragen u melding te maken van voorbeelden die dienen te worden aangepast of verwijderd. Vertalingen met grof of informeel taalgebruik worden meestal rood of oranje gemarkeerd.