Download for Windows Premium
Publiciteit
restart the source database

Examples with "restart the source database" and their translation in Japans

We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
If you did not reset the initialization parameters while an instance was running, but instead reset them in the initialization parameter file in Step 2, then restart the source database must be open when it sends redo data to the downstream database, because the global name of the source database is sent to the downstream database only if the source database is open.
手順2で、インスタンスの実行中には初期化パラメータをリセットしなかったが、初期化パラメータ・ファイルでリセットした場合は、データベースを再起動します。ソース・データベースのグローバル名は、ソース・データベースがオープンな場合にのみダウンストリーム・データベースに送信されるため、ダウンストリーム・データベースにREDOデータを送信するときには、ソース・データベースがオープンである必要があります。

Andere resultaten

Make sure the initialization parameter changes are in effect at both the source database and the downstream capture you set the initialization parameters in an initialization parameter file at a database, then you must restart the database.
初期化パラメータがソース・データベースとダウンストリーム取得データベースの両方で有効であることを確認します。データベースの初期化パラメータ・ファイルの初期化パラメータを設定した場合は、データベースを再起動する必要があります。
You will only see this page of the wizard if the source database is running in NOARCHIVELOG mode. If you choose to leave the database in NOARCHIVELOG mode, the job will shut down the database and restart it in mounted mode. When the clone operation is complete, the database will be reopened. If you switch the database to ARCHIVELOG mode, the job will shutdown and switch the database to ARCHIVELOG mode, append the specified log archive destination settings to the specified init paramater file, restart the database, and then perform the clone the job completes, the database will remain in ARCHIVELOG mode.
ソース・データベースがNOARCHIVELOGモードで実行されている場合、ウィザードのこのページの表示のみ行います。データベースをNOARCHIVELOGモードのままにするよう選択すると、ジョブはデータベースを停止し、マウント・モードで再起動します。クローン操作が完了した後に、データベースを再オープンします。データベースをARCHIVELOGモードに切り替えると、ジョブはデータベースを停止してデータベースをARCHIVELOGモードに切り替え、指定したログ・アーカイブの保存先の設定を指定した初期パラメータ・ファイルに追加し、データベースを再起動してクローン操作を実行します。ジョブが完了しても、データベースはARCHIVELOGモードのままです。
Locate the source database and identify the objects that you want to import.
ソース データベースを探し、インポートするオブジェクトを確認します。
Identifies the source database of the messages applied by an apply process.
適用プロセスによって適用されるメッセージのソース・データベースを示します。
Ensure the channel is correctly configured on the source database.
チャンネルがソース データベースで正しく構成されていることを確認してください。
This option specifies the connection parameters for the source database.
このオプションでは、ソース・データベースの接続パラメータを指定します。
Gets a list of active reference cubes registered on the source database.
ソース・データベースに登録されたアクティブ・参照キューブのリストを取得します。
Populate label-based measure group tables with data from the source database or system.
ソース データベースまたはシステムのデータをラベルベースのメジャー グループ テーブルに入力します。
All tables listed in your metaoutline must be present in the source database.
メタアウトラインにリストされるテーブルは、すべてソース・データベースに存在している必要があります。
On a command line, use Data Pump to export the source database.
コマンドラインで、データ・ポンプを使用してソース・データベースをエクスポートします。
Disconnect all applications and users from the source database.
ソース・データベースから、すべてのアプリケーションとユーザーの接続を切断します。
Verify that the source database is accessible.
ソース・データベースにアクセスできることを確認します。
Er zijn geen resultaten gevonden voor deze term.
Ga naar Premium voor toegang tot miljoenen vertaalvoorbeelden, onbeperkt woorden opslaan en leren, zonder advertenties.
Woord & uitdrukking van de dag
Afbeelding van de dag
mole: small burrowing mammal with velvety fur and tiny eyes
Ontdek het woord
Publiciteit

Suggesties

Resultaten: 33857. Exact: 1. Verstreken tijd: 111 ms.