Thus, it is possible to selectively excite only a desired region without using an RF pulse for signal suppression.
これにより信号抑制のためのRFパルスを用いずに所望の領域のみを選択励起できる。
The predetermined value is the maximum value of flip angle of nuclear magnetization in the non-photography mode or the flip angle by the RF pulse used at the end of the non-photography mode, for example.
この一定値は、例えば、非撮影モードのときの核磁化のフリップ角の最大値あるいは非撮影モードの最後で用いたRFパルスによるフリップ角とする。
In addition, the irradiation frequency of the half RF pulse is adjusted to eliminate positional deviation of an intensity distribution between the cathode and anode data.
また、正極データと負極データとの強度分布の位置ずれを解消するよう、ハーフRFパルスの照射周波数を調整する。
At this time, an RF pulse for varying the flip angle of nuclear magnetization in the photography mode (502) within a range up to a predetermined value determined by on the flip angle of nuclear magnetization in the non-photography mode (501) is irradiated.
この際、撮影モード502における核磁化のフリップ角を、非撮影モード502における核磁化のフリップ角で決まる一定値以下の範囲で変化させるRFパルスを照射する。
The three-dimensional FSE method as a three-dimensional measurement, the hybrid radial method as the non-orthogonal sampling are used, and an echo signal in one blade is acquired by one excitation RF pulse.
3次元計測として3次元FSE法を、非直交系サンプリング法としてハイブリッドラディアル法をそれぞれ適用し、1ブレード内のエコー信号を1回の励起RFパルスにより取得する。
It is possible to easily and with a preferable S/N ratio, image hardness/softness (viscosity/elasticity) of a biological tissue and its dynamic change by quasi-real time measurement which reduces the time required from an RF pulse excitation until an NMR signal measurement without causing a load to an inclined magnetic field.
傾斜磁場に負担をかけることなく、RFパルス励起からNMR信号計測までの時間を短縮した準リアルタイム計測により、生体組織の硬さ・柔らかさ(粘弾性)とその動的変化を簡易にSN比を良くして画像化することを目的とする。
By storing only the precise times for rising and falling edges of the RF pulse, the PAS makes optimal use of the 4M Event dual-memory architecture of the TDC; which supports unrestricted time capture length at rates as high as 1M Events per second.
またRFパルスの立ち上がり/立ち下りエッジの時間のみを保存することにより、4 M のイベント・メモリを効率よく使用できます。 さらにTDCのデュアル・メモリ・アーキテクチャにより、1 Mイベント/s でタイム・キャプチャが行えます。
MAGNETIC RESONANCE IMAGING APPARATUS AND RF PULSE ADJUSTMENT METHOD
磁気共鳴イメージング装置及びRFパルス調整方法
Specifically, the number of RF pulses in the RF pulse sequence and the flip angle for the RF pulses in an SSFP sequence are set, and the monotonically increasing flip angle with offset is found, based on the set number of RF pulses in the RF pulse sequence and the flip angle for the RF pulses in the SSFP sequence, and used as the RF pulse sequence.
具体的には、RFパルス系列のRFパルス数と、SSFPシーケンスにおけるRFパルスのフリップ角とを設定し、設定されたRFパルス系列のRFパルス数とSSFPシーケンスにおけるRFパルスのフリップ角とに基づいて、オフセットを有して単調増加するフリップ角を求めてRFパルス系列とする。
A ratio between ON-state output power and OFF-state output power of an RF pulse signal being delivered to an RF pulse output terminal (7) can be set to be large.
これにより、RFパルス出力端子7に出力するRFパルス信号のON時の出力電力とOFF時の出力電力の比を大きく取ることができる。
The deviation calculation section calculates the deviation between the center frequency of an RF pulse that follows the initiation of a pulse sequence and a resonant center frequency.
ズレ算出部は、パルスシーケンス開始後のRFパルスの中心周波数と共鳴中心周波数とのズレを算出する。
A double inversion pulse generated by combining a non-slice-selective inversion RF pulse and a slice-selective inversion RF pulse is combined as a pre-pulse with three-dimensional measurement using a non-orthogonal sampling.
スライス非選択の反転RFパルスとスライス選択の反転RFパルスを組み合わせたダブルインバージョンパルスをプリパルスとして、非直交系サンプリング法を用いた3次元計測に組み合わせる。
Also, the sequence control unit (120) sets the application timing of the RF pulse such that a first amount of time, from the time when the first RF pulse is applied without selecting a region until the collection of the magnetic resonance signals starts, differs from a second amount of time, from the time when the labeling region is selected and the second RF pulse is applied until the collection of magnetic resonance signals starts.
また、シーケンス制御部(120)は、領域を選択せずに第1RFパルスを印加してから磁気共鳴信号の収集を開始するまでの第1時間と、標識化領域を選択して第2RFパルスを印加してから磁気共鳴信号の収集を開始するまでの第2時間とが異なるように、RFパルスの印加タイミングを設定する。