Vertaling van "select disk" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
This is done by setting a command SELECT DISK...
これはコマンドを設定することによって行われます ディスクを選択します。
Select disk if you are adding a disk-type storage unit.
ディスク・タイプのストレージ・ユニットを追加する場合、ディスクを選択します。
Partition Count Under "Select Disk", choose the partition count as you want.
パーティションの数 ディスクの選択の下でパーティションの数を好きなように選択できます。
In the working window of the Handy Recovery, click the "Select Disk" button.
Handy Recoveryの作業ウィンドウで 、 [ ディスクの選択]ボタンをクリックします。
And drive: SELECT DISK with the corresponding number.
そしてドライブ:対応する番号を持つディスクを選択します。
3.2 Select disk In the next window, the program will propose to choose the option: Creating a boot flash drive or boot disk.
3.2ディスクを選択します 次のウィンドウで、プログラムはオプションを選択することを提案します。 ブートフラッシュドライブまたはブートディスクの作成。
Then necessary Select disk to check and click on it PKM...
それから必要です ディスクを選択してください 確認してクリックする PKM。
Startup window "Phoenix" Step 2. Select Disk In the starting window of the program there are icons of devices.
起動ウィンドウ "Phoenix" ステップ2.ディスクを選択します プログラムの開始ウィンドウでは、デバイスのアイコンがあります。
Definitely, if your partition table and boot sector of the select disk were removed, there is no chance to recover deleted partition.
確かに、選択したディスクのパーティションテーブルとブートセクタが削除された場合、紛失したパーティションを復元する機会はありません。
Please select disk type
ディスクタイプを選択してください
If there are multiple partitions on your external drive, follow the commands below: "list disk" "select disk n" - "n" is the number of your USB flash drive. "clean" - all data and partitions on the selected disk will be deleted. "create partition primary" "format fs=fat32" Notice: As format will make all data lost on your drive, you can back up the data that you care about before format.
リストディスク nディスクを選択 - nはUSBフラッシュドライブの番号です。 クリーン - 選択したディスク上のすべてのデータとパーティションが削除されます。 パーティションプライマリを作成する フォーマットfs = fat32 注意: フォーマットではドライブ上のすべてのデータが失われるため、フォーマット前に気になるデータをバックアップすることができます。
You can also select disk backup if you want to include all partitions on the hard drive.
HDD上のパーティション全体をバックアップする場合は、[ディスクバックアップ]を選択することもできます。
Then enter the following command and confirm its execution by pressing the key "ENTER": select disk no.
次に、次のコマンドを入力し、キーを押して実行を確認します "入る" : ディスク番号を選択します。