An overview of a typical high-speed serial-communication link is provided with respect to how data is transformed and recaptured over the link.
まず、典型的な高速シリアル通信リンクの概要を紹介し、リンクでデータがどのように変換され、また、回復されるのかを説明します。
In a serial-communication system, the CDR recovers the clock signal from the data stream.
シリアル通信システムでは、CDRはクロック信号をデータストリームから再生します。
This article examines the component blocks of CDR needed to implement a successful CDR in high-speed serial-communication link applications.
この記事では、高速シリアル通信リンクアプリケーションでCDRを滞りなく実行するために必要なCDRのコンポーネントブロックを検討します。
Today's serial-communication systems have opted to embed clock information in the data stream rather than using an external trigger signal at the receiver.
最新のシリアル通信システムは、レシーバ側で外部トリガ信号を使用するよりもむしろ、クロック情報をデータストリーム内に埋め込むことを選ぶようになっています。
This article is not a tutorial on the topic of jitter per se, but it would be difficult to talk about testing a serial-communication link without saying a word or two about jitter.
このアーティクルは、ジッタそのもののトピックに関するチュートリアルではありませんが、ジッタに関して多少とも説明しなければ、シリアル通信リンクの試験について論じることは困難です。
To minimize the BER, you must properly time this phase shift with the data stream, and for that reason serial-communication standards now place a greater importance on highly accurate measurement of jitter.
BERを最小化するには、データストリームでこの位相シフトを正しくタイミングする必要があります。そのため、現在、シリアル通信規格ではジッタの高精度測定に、より高い重要性が置かれるようになっています。