Vertaling van "sp-b" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Hit the enter key and type an entry for SP-B.
Enterキーを押し、SP Bのエントリーを入力します。
Configured the network settings for SP-B.
SP Bのネットワーク設定を構成する
SP-B will reboot and your serial session will be disconnected.
SP Bが再起動し、シリアル・セッションは切断されます。
Set network properties for SP-B
SP Bのネットワーク・プロパティを設定する
Disconnect serial cable from SP-B
SP Bからシリアル・ケーブルを取り外す
Connect serial cable to SP-B
SP Bにシリアル・ケーブルを接続する
Apply settings (SP-B reboots)
設定を適用する(SP Bが再起動する)
If any changes are required for SP-B you would make them now in the same manner.
SP Bに対して変更が必要な場合は、同様にすぐにSP Bに変更を加えます。
Close your browser, then disconnect the serial cable from SP-A and reconnect it to the serial port on SP-B.
ブラウザを閉じて、SP Aからシリアル・ケーブルを取り外し、それをSP Bのシリアル・ポートに再接続します。
Each domain must also have one domain master (either SP-A or SP-B on a particular array).
また、ドメインごとに1つのドメイン・マスター(特定のアレイのSP AまたはSP Bのいずれか)を設定する必要があります。
Follow these steps to complete the configuration of the array and both SP-A and SP-B properties.
次の手順に従って、アレイと、SP AおよびSP Bのプロパティを設定します。
The purpose of this exercise is to complete the configuration of both SP-A and SP-B properties.
実習7では、SP AとSP Bのプロパティを設定することを目的としています。
IP address for SP-B; X see monitor
(SP BのIPアドレス、Xについてはモニタを参照してください)