Move the cursor over the desired plane axis system axis, click and drag to rotate the plane around the selected axis.
目的の平面の座標軸にカーソルを移動して、選択した軸を中心にクリック & ドラッグ操作を行って平面を回転させます。
Select X, Y or Z radio buttons to position the normal vector (W-axis) of the plane along the selected absolute system axis.
[X]、[Y] または [Z] ラジオ ボタンをクリックして、選択した絶対座標軸を基準に平面の法線ベクトル (W 軸) を配置します。
A relative swept volume computes the swept volume of a moving part in the system axis of another moving part.
相対スイープ ボリューム は、別のパーツの座標系で移動パーツにスイープしたボリュームを計算することができます。
You can compute the swept volume of a moving part in the system axis of another moving part. You can use this option when you need to analyze the swept volume of a product versus another product (moving or not).
別の移動パーツの座標系で、移動パーツにスイープしたボリュームを計算することができます。1 つのプロダクトと、別のプロダクト (移動の有無にかかわらず) のスイープしたボリュームを比較解析する必要がある場合に、このオプションを使用します。
If you select the circle as the Reference product, you can compute the square swept volume in the circle system axis.
円を [基準プロダクト] として選択した場合、円の座標軸系で四角形のスイープ ボリュームを計算することができます。
The part whose system axis is being used for the calculation is the Reference product.
座標系が計算に使われているパーツを [基準プロダクト] とします。
OPS - Position Synchronization - a special firmware module embedded in the sensor's electronics which records encoders output and synchronizes the accurate position of up to 3 system axis together with the sensor measurements.
OPS(位置同期 ) : 特別なファームウェア・モジュールがセンサ回路に組み込まれており、エンコーダの出力を記録し、3システム軸までの正確な位置とセンサ測定を同期させます。
OPS - Position Synchronization - a special firmware module embedded in the sensor's electronics which records encoders output and synchronizes the accurate position of up to 3 system axis together with the sensor measurements.
OPS(位置同期 ) : OPS(オプティメット・ポジション・シンクロナイザ)により、エンコーダの出力を記録し、最大3軸までの正確な位置とセンサの測定を同期 コノポイント10HDは非常に汎用性の高いセンサであり、1つのヘッドで対物レンズを交換することにより大小様々な物体の測定が可能です。