This keeps the C compiler from linking the system start up libraries against the.so file.
このオプションは、.so ファイルに対してシステムスタートアップライブラリをリンクしないよう、Cコンパイラに伝えるものです。
Save and close the file Start the license server Configure and start the License Server You can start the License Server two ways: Manually Automatically at system start up Manually There are two ways to start the license server: From the Command Line Using the LMTOOLS utility To start the license server (lmgrd) from the command line: To start the server simply execute the startlicense.bat file.
ライセンスサーバの設定と起動 ライセンスサーバ の起動には2つの方法があります。 手動 システムスタートアップ時に自動立ち上げ 手動 次のどちらかの方法でライセンスサーバを起動します。 コマンドラインから実行 LMTOOLS ユーティリティを使用 ライセンスサーバ(lmgrd)をコマンドラインから起動 ライセンスサーバを 起動 するには startlicense.bat ファイルを実行します。
Suggested cleaning chemicals and procedures provided prior to system start up.
システムを起動する前に提供される洗浄剤および手順を推奨します。
This is useful for system start up scripts.
これはシステムのスタートアップスクリプトで便利である。
Packages are presented in the order in which they appear in the system start up process.
登場するパッケージは、システムが起動する過程で現れる順番に並んでいる。
Otherwise, system start up will launch the X server on the console!
そうでなければ、システムの立 ち上げでコンソール上に X サーバを起動します!
Typically, the system start up procedure re-mounts the root file system read-write later (e.g. after fsck'ing it).
大抵は、システムのスタートアッププロシージャが後で(例えば、fsckを行った後など)ルートファイルシステムを読み書き可能で再マウントします。
In case you need to avoid linking against the system start up files, this can be done by using the gcc (1)
システムの起動ファイルに対するリンクを避ける必要がある場合、gcc (1)
At system start up
システムの開始時
A non-settable, monotonically increasing clock that measures time since some unspecified point in the past that does not change after system start up.
過去のある時点からの時間を計測する、単調増加のクロック。 起点となる時点はシステム起動後には変更されない。
When the kernel is built, the file system start up code contains calls to the initialisation routines of all of the built in file systems.
カーネルがビルドされると、ファイルシステム初期化コードには、組み込まれたファイルシステムすべてに関する初期化ルーチンへの呼び出しコードが含められる。
initrd is mainly designed to allow system start up to occur in two phases, where the kernel comes up with a minimum set of compiled-in drivers, and where additional modules are loaded from initrd.
まず最初の段階で最低限のドライバのみを組みこんだカーネルを起動し、initd から各種のモジュールをロードするようにします。
It is started as a kernel thread at system start up time and, rather confusingly, it calls itself "kflushd" and that is the name that you will see if you use the ps command to show the processes in the system.
そのデーモンは、起動時にはシステム上のカーネルスレッドとして起動される。 少しややこしいのだが、それは "kflush" と呼ばれ、その名前は、システム上のプロセスを表示する ps コマンドを使うと見ることができる。