The temperature sensor is installed inside a silicone tube sheath.
温度センサはシリコンチューブ製シース管に設置します。
In the excoplave heating is regulated by the temperature sensor.
エクスプレーブの加熱は温度センサによって調節される。
A temperature sensor has been removed or is not being reported.
The panel has another secret - the built-in temperature sensor.
For the selection of a temperature sensor, these data are quite enough.
温度センサーの選択には、これらのデータで十分です。
The resistors are connected in turn instead of the temperature sensor.
温度センサーの代わりに抵抗が順番に接続されます。
An example of a simple management device would be a temperature sensor chip.
簡単な管理デバイスの例として、温度センサー・チップがある。
Use a digital multimeter to check your coolant temperature sensor.
デジタルマルチメータを使用して、クーラント温度センサーを確認してください。
Wire connection is carried out when controlling the temperature sensor.
温度センサを制御するときにワイヤ接続が実行されます。
Everything is fine, now you can calibrate the temperature sensor.
すべてが大丈夫です、今、あなたは温度センサーを校正することができます。
This comparison measurement checks potential drifts of the internal motor temperature sensor.
この 比較測定により内部温度センサのドリフトの可能性がチェックできます。
Therefore, it was decided to make a temperature sensor from available thermistors.
そのため、入手可能なサーミスタから温度センサーを作ることにしました。
Onboard calibration accuracy does not change with time unless the temperature sensor degrades.
軌道上校正の精度は、温度センサーが劣化しない限り変化しません。