Vertaling van "using dhcp" in Japans
Dynamic assignment is usually performed using DHCP
通常、動的割り当てはDHCPを使用して実行
The following task map shows the high-level tasks that must be performed to enable clients to obtain installation parameters by using DHCP.
次の作業マップに、クライアントが DHCP を使用してインストールパラメータを取得するために必要な作業を示します。
When using DHCP, you do not need to create a separate boot server.
DHCP を使用する場合は、ブートサーバーを個別に作成する必要はありません。
Using DHCP, when connecting a computer to the network, it is automatically assigned to the IP number of the network host (another computer or router/ modem).
DHCPを使用すると、コンピュータをネットワークに接続するときに、ネットワークホストのIP番号(別のコンピュータまたはルータ/モデム)に自動的に割り当てられます。
The auto parameter specifies that addresses should be assigned by using DHCP.
auto パラメータは、アドレスを DHCP を使って割り当てるように指定します。
If you are using DHCP, does the ISP require MAC address authentication, and if so, do they have the right address?
DHCP を使っているなら、ISP は MAC アドレスによる認証を必要とします。 もしそうなら、正しいアドレスになっていますか?
You need to create one scope for each subnet that has clients that you want to manage using DHCP.
DHCP を使用して管理するクライアントが配置されたすべてのサブネットに対し、1 つずつスコープを作成する必要があります。
However, if the system on which the is to be installed is located in a different subnet than the install server and you are not using DHCP, a boot server is required on that subnet.
ただし、 をインストールするシステムがインストールサーバーとは異なるサブネット上に存在する場合で、DHCP を使用していないときは、そのサブネットにブートサーバーが必要です。
If you are not using DHCP and the install server and the client are on a different subnet, you must create a boot server.
DHCP を使用しておらず、インストールサーバーとクライアントが異なるサブネット上にある場合は、ブートサーバーを作成する必要があります。
If you are using DHCP to set installation parameters or your install server and client are on the same subnet, you do not need a separate boot server.
DHCP を使用してインストールパラメータを設定する場合や、インストールサーバーとクライアントが同じサブネット上に存在する場合は、個別のブートサーバーは不要です。
Only a single IP address needs to be allocated from the customer's address domain for the service processor, and this address may be assigned statically or dynamically using DHCP.
アドレス・ドメインからサービス・プロセッサに割り当てる必要のあるIPアドレスは1つのみであり、このアドレスはDHCPを使用して静的または動的に割り当てることが可能です。
Using DHCP on the local network simplifies the assignment of IP addresses both on desktop and mobile devices.
ローカルネットワークでDHCPを使用すると、デスクトップとモバイルデバイスの両方でIPアドレスの割り当てが簡単になります。
There is an easy way to solve this task using DHCP - to reserve the IP address for a specific computer.
DHCPを使用してこのタスクを解決する簡単な方法 - 特定のコンピュータのIPアドレスを予約します。