Instead, we recommend that you clean the probe tip after each use.
Wel raden we je aan om de sonde na elk gebruik schoon te maken.
Additionally, the window and/or probe tip area should never be modified, changed, or adjusted.
Bovendien mag de lens en/of de sonde nooit veranderd, aangepast of opnieuw geïnstalleerd worden.
The user then obtains this information by applying heat locally via the probe tip and measuring the thermomechanical response.
De gebruiker verkrijgt dan deze informatie door hitte via het sondeuiteinde plaatselijk toe te passen en de thermomechanische reactie te meten.
Once in contact with the region of interest the probe tip is resistively heated while the cantilever provides sensitive force control and measurement between the tip and sample.
Eens in contact met het gebied van belang wordt het sondeuiteinde resistively verwarmd terwijl de cantilever gevoelige krachtcontrole en meting tussen het uiteinde en de steekproef verstrekt.
The effects of thermal errors on the location of the probe tip are identical to the effect of static geometric errors.
De effecten van thermische fouten op de locatie van de tasterpunt zijn identiek aan het effect van statisch geometrische fouten.
Ideally, you should take hits within ±20º of perpendicular to avoid skidding the probe tip.
Het is ideaal als u aanrakingen kunt maken binnen ±20º van loodrecht om slippen van de tasterpunt te voorkomen.
A scanning probe microscope has a sharp probe tip on the end of a cantilever, which can scan the surface of the specimen.
Een microscoop van de aftastensonde heeft een scherp sondeuiteinde op het eind van een cantilever, die de oppervlakte van het specimen kan aftasten.
The purpose of this model is to calculate the combined effect of all the geometric errors of all axes on the position of the probe tip.
Het doel van dit model is de berekening van het gecombineerde effect van alle geometrische fouten van alle assen op de positie van de tasterpunt.
Static geometric errors are those errors caused by microscopic imperfections in the shapes of the guide ways and scale systems that lead to errors in the measured location of the probe tip when the machine is not moving.
Statische geometrische fouten zijn fouten die veroorzaakt worden door microscopische imperfecties in de vormen van geleiders en schaalsystemen die leiden tot fouten in de gemeten locatie van de tasterpunt als de machine niet beweegt.
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values.
Het systeem verstrekt een outputvoltage dat direct evenredig aan de afstand tussen het sondeuiteinde en de waargenomen geleidende oppervlakte is en zowel statische (positie) en dynamische (trillings) waarden kan meten.
In order to calculate the effects of the thermal errors on the location of the probe tip we need a temperature model that characterizes the machine thermal behavior as well as input values that characterize the thermal environment.
Voor de berekening van de effecten van thermische fouten op de locatie van de tasterpunt is een temperatuurmodel nodig dat het thermische gedrag van de machine karakteriseert, alsmede invoerwaarden die de thermische omgeving karakteriseren.
When an ear canal does not receive the desired pressure secondary to an inadequate seal of the probe tip, it is indicated as 'LEAK'.
Wanneer een oorkanaal niet de gewenste druk secundair aan een ontoereikende verbinding van het sondeuiteinde ontvangt, is het vermeld als LEK'.
Inset photo shows thermal probe cantilever overlying the un-crosslinked specimen, with the arrows indicating the location of the thermal probe tip that is under the cantilever.
De foto van het Bijvoegsel toont thermische sondecantilever die het un-crosslinked specimen, met de pijlen bedekt die op de plaats van het thermische sondeuiteinde wijzen dat onder de cantilever is.