Vertaling van "stackups" in Nederlands
We work with high-tech pcb partners, who are specialized in high-tech boards and with complicated buildups (stackups).
Printplaten Wij werken met high-tech pcb partners, die gespecialiseerd zijn op het gebied van high-tech boards en gecompliceerde buildups (stackups).
Your design can be rendered into multilayer stackups that include single and multiple air gaps for conformal installations, conventional plated through hole (PTH) plating, plus coverlay and solder mask circuit protection.
Uw ontwerp kan worden gemaakt in multilayer stackups die enkelvoudige en meerdere luchtgaten bevatten voor conformale installaties, conventioneel geplateerde gat (PTH) plating, plus deklaag en soldeermasker circuit bescherming.
Andere resultaten
Add a blank signal layer near the center of the PCB stackup.
Voeg een lege signaallaag toe nabij het midden van de PCB-stackup.
Stackup and wrapped by plastic bag or non-woven fabric
And lastly was the GridLok concept of the arm inside a virtually unlimited measuring envelope, allowing leapfrogging without error stackup.
En ten slotte was er het GridLok-concept van de arm binnen een virtueel onbeperkt meetkader, waarbij overspringen mogelijk is zonder stapelfouten.
This way, when the components are assembled, the stackup unbalance is not large enough to cause a problem with the complete turbo.
Op deze manier blijft bij assemblage van de turbo de 'toegevoegde onbalans' in verhouding zodanig laag, dat dit geen probleem kan en mag veroorzaken.
The stackup can then be modified to obtain the desired impedances and imported back into Altium Designer.
Ook kan de stackup worden aangepast in Altium Designer en terug worden geëxporteerd naar de ICD Stackup Planner.
Therefore, it is best to use the technique of arranging traces and PCB stackup to solve or reduce EMI problems, such as high-speed signals going through the inner layer.
Daarom is het het beste om de techniek van het rangschikken van sporen en PCB-stackup te gebruiken om EMI-problemen op te lossen of te verminderen, zoals hogesnelheidssignalen die door de binnenste laag gaan.
Stackup unbalance is not a major concern with larger turbochargers. Typically, the turbine and compressor wheels in these turbos are balanced to a tolerance substantially closer than required by the assembled turbo.
Bij deze modellen worden de hoofdcomponenten van de rotor, turbine en compressorwiel, gebalanceerd tegen een duidelijk lagere tolerantie, dan wat de tolerantie eisen voor de complete turbo van dat model zijn.
The fastest, most effective method of eliminating the stackup unbalance that causes these problems is to trim balance the moving parts of the assembled turbo CHRA (center housing rotating assembly).
De gebruikelijke en meest effectieve manier om 'toegevoegde onbalans' te elimineren is het balanceren van een volledig afgemonteerd 'binnenwerk' van de turbo, wat dus inhoudt de samengebouwde complete turbo, minus de twee eindhuizen compressor en turbinehuis.