Vertaling van "10ms" in Pools
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The inotify backend is reporting events with less delay (no event will be delayed more than 10ms) and wakeups due to file monitoring have been significantly reduced.
Serwer zaplecza raportuje zdarzenia z mniejszym opóźnieniem (żadne zdarzenie nie będzie opóźnione o więcej niż 10ms), a pobudki spowodowane monitorowaniem plików zostały znacznie zmniejszone.
Depending on the distance, select whether it be a copy of synchronous (delay of no more than 10ms) or asynchronous (delay of no more than 200ms).
W zależności od odległości wybieramy czy ma to być kopia synchroniczna (opóźnienie nie większe niż 10ms) lub asynchroniczna (opóźnienie nie większe niż 200ms).
Time of dielectric strength:less than 10ms 9.
Czas wytrzymałości dielektrycznej: poniżej 10 ms 9.
The current values used for calculating I2T should be within the standard range of 10ms.
Bieżące wartości wykorzystywane do obliczania I2T powinny mieścić się w standardowym zakresie 10 ms.
Here you can experience the face opening speed of face recognition in 10ms (1/ 10s).
Tutaj możesz poznać szybkość rozpoznawania twarzy podczas otwierania twarzy w 10ms (1/ 10s).
This setting controls the emulated CPU execution speed (number of instructions executed every 10ms).
Ta wartość określa prędkość emulowanego procesora (ilość instrukcji wykonywanych co 10ms).
IP 68, resistant to pressures up to 20 bar and overloading of up to 10 g (30 g through 10ms)
Odporność obudowy IP 68, wytrzymała na ciśnienia do 20 bar i przeciążania do 10 g (30 g przez 10ms)
The current values used for calculating I2T should be within the standard range of 8ms ~ 10ms.
Bieżące wartości wykorzystywane do obliczania I2T powinny mieścić się w standardowym zakresie 8ms ~ 10ms.
The current values used for calculating I2T should be within the standard range of 8ms ~ 10ms.
Bieżące wartości używane do obliczania I2T powinny mieścić się w standardowym zakresie 8ms ~ 10ms.
Dips, swells and interruptions are controlled comparing the RMS value of the voltage and are checked every half cycle of the fundamental frequency (e.g. every 10ms at 50Hz).
Spadki, przepięcia i zaniki są kontrolowane w oparciu w wartości RMS napięcia i są sprawdzane co pół cyklu częstotliwości podstawowej (np. co każde 10ms przy 50Hz).
It is worth noting that the 10ms interval is the rate at which computed results (utilising a 1Ms/s or 2.2Ms/s sampling rate) are returned, PPALoG offers true real time no gap high speed data logging with no missing data.
Warto zauważyć, że interwał 10 ms jest równoważny z częstotliwością, z jaką zwracane są obliczone wyniki (przy częstotliwości próbkowania 1 Ms/s, 2.2 Ms/s) - PPALoG umożliwia więc rejestrację w czasie rzeczywistym, bez żadnej utraty danych.
The 1769-OB32 has a 2.0 A for 10ms surge current, which repeats every 2 seconds.
1769-OB32 ma prąd 2,0 A dla 10 ms prądu udarowego, który powtarza się co 2 sekundy.
Short Hold-on delay: The delay time is about 3S max and the hold-up time is about 10mS min.
Zwłoka krótkiego oczekiwania: Opóźnienie wynosi około 3S maks., A czas podtrzymania wynosi około 10 ms min.