The interface device shall accept the complementary mode for ACK.
Urządzenie interfejsu akceptuje tryb uzupełniający dla ACK.
ACK - the client sends an acknowledgement message to the host.
ACK - klient potwierdza otrzymanie odpowiedzi od serwera.
Only the ACK scan, which is used to map firewall rulesets, classifies ports into this state.
Tylko skanowanie ACK, które jest używane do mapowania reguł firewalla, może przypisać portom taki stan.
In addition, it provides ACK packet priority which speeds up downloads when you are sending out a lot of data.
Dodatkowo zapewnia to priorytet pakietów ACK, który przyspiesza pobieranie kiedy wysyłają dużo danych.
It generates the same packet as an ACK scan, but checks whether the window field of the packet has been modified.
Generuje taki sam pakiet jak metoda ACK, ale sprawdza czy pole okna pakietu było zmienione.
Simple packet filtering will allow established connections (packets with the ACK bit set), whereas a more sophisticated stateful firewall might not.
Proste filtrowanie pakietów pozwoli nawiązać połączenia (pakiety z zestawem bitów ACK), aczkolwiek bardziej wyszukana zapora może nie zezwolić na to.
If ACK is cleared to 0, it indicates that packet does not contain any acknowledgement.
Jeśli ACK jest kasowany na 0, oznacza to, że pakiet nie zawiera żadnego potwierdzenia.
ACK scanning is one of the more unusual scan types, as it does not exactly determine whether the port is open or closed, but whether the port is filtered or unfiltered.
Skanowanie ACK jest jednym z najbardziej unikalnych typów skanowania, ponieważ nie stwierdza dokładnie czy port jest otwarty czy zamknięty, tylko czy port jest filtrowany czy nie.
bit 2 - set by a pulse on the ACK input, reset by writing logical 1 to the bit 2 of register 110
bit 2 - ustawiany po wykryciu impulsu na wejściu ACK, kasowany przez wpisanie logicznej jedynki do bitu 2 rejestru 110
Press ACK or lift handset.
Wciśnij ACK lub podnieś słuchawkę.
This is also true for the ACK character sent by the card after a P3 character emitted by the interface device.
Odnosi się to także do znaku ACK wysyłanego przez kartę po wysłaniu znaku P3 przez urządzenie interfejsu.
The reason for offering both SYN and ACK ping probes is to maximize the chances of bypassing firewalls.
Powodem udostępniania zarówno metody SYN jak i ACK jest zwiększenie szansy na ominięcie systemu zaporowego.
Indicates the status of the received message/report, either ACK (acknowledged) or NAK (not acknowledged)
Określa status otrzymanego komunikatu/raportu - ACK (potwierdzony) lub NAK (niepotwierdzony)