Drying time depends on the layer thickness.
Material cost depends on layer thickness.
The layer thickness should be equal to about two millimeters.
The layer thickness depends on the consistency of the materials to be bonded.
Each layer thickness is different depending on the properties and dimensions desired by the customer.
Każda grubość warstwy jest różna w zależności od właściwości i wymiarów pożądanych przez klienta.
That standard regulates the specifications of products without specifying the layer thickness - it is apparent from the calculations.
Wspomniana norma reguluje parametry techniczne produktów nie określając natomiast grubości warstwy - to wynika z wyliczeń.
Adjusting of the layer thickness for optimal corrosion protection is possible through simple dilution of the product with water.
Ustawienie grubości warstwy w celu optymalnej ochrony antykorozyjnej jest możliwe wskutek łatwego rozcieńczenia produktu wodą.
At minimum, there is a core and an outer layer; each layer thickness could be optimized to your needs.
Co najmniej istnieje rdzeń i warstwa zewnętrzna; każda grubość warstwy może być zoptymalizowana do twoich potrzeb.
Development and implementation of model of design sensitivity computation with respect to layer thickness and angle of fibre deposition in composite airplane hull coatings.
Rozwinięcie i implementacja modułu do obliczeń wrażliwości projektowej ze względu na grubość warstwy i kąty ułożenia włókien w kompozytowych pokryciach kadłubów samolotów.
When the layer thickness changes the result is as follows
Dla zmiany grubości warstwy wynika co następuje
The total layer thickness is then increased to a maximum of 400 g/m².
Całkowita grubość warstwy zwiększa się wtedy do maksymalnie 400 g/m².
Then, the workbench is lowered by a layer thickness of the section layer, and the other layer section is cured.
Następnie stół warsztatowy jest obniżany o grubość warstwy warstwy przekroju, a druga sekcja warstwy jest utwardzana.
The typical layer thickness is between 20 and 50 µm.
Typowa grubość warstwy wynosi od 20 do 50 µm.