The hard outer casing is made of impact resistant PP (polypropylene), which offers maximum protection from light and damage.
Twarda, zewnętrzna obudowa jest wykonana z odpornego na uderzenia polipropylenu (PP), który zapewnia maksymalną ochronę przed światłem oraz uszkodzeniami.
The operator must strictly abide by the operating procedures and the outer casing of the equipment and the metal casing touched by personnel must be well grounded.
Operator musi ściśle przestrzegać procedur operacyjnych, a zewnętrzna obudowa urządzenia i metalowa obudowa dotknięta przez personel muszą być dobrze uziemione. Etykietka
When you close the Diskus, the lever automatically moves back to the original position, with the outer casing protecting the Diskus when not in use.
Po zamknięciu aparatu do inhalacji Diskus suwak automatycznie powraca do pierwotnej pozycji, a zewnętrzna osłona chroni Diskus, kiedy nie jest używany.
The outer casing contains a gravel layer placed on top of the natural soil for better drainage.
Zewnętrzna osłona zawiera warstwę umieszczoną na wierzchu gleby naturalnej dla lepszego drenażu.
The thicker diaphragm, foil and outer casing are used to ensure the safety of the main body of the product.
Grubsza membrana, folia i obudowa zewnętrzna służą do zapewnienia bezpieczeństwa głównego korpusu produktu.
The working ground wire (high-voltage tail, voltage-stabilizing capacitor end grounding wire) and protective ground wire (operating part outer casing) should be connected separately and have good grounding performance.
Przewód uziemienia roboczego (końcówka wysokiego napięcia, przewód uziemiający po stronie kondensatora stabilizującego napięcie) i przewód uziemienia ochronnego (obudowa zewnętrzna części roboczej) powinny być podłączone osobno i mieć dobre parametry uziemienia.
The entire system is enclosed in a stainless steel/glass outer casing.
The fibreglass on the outer casing was severely damaged in the incident.
But engineers find cracks in its outer casing.
The temperature is also monitored on the outer casing of the thermal vacuum chamber.
The device is designed with a micro switch on the outer casing and the handle.
The outer casing is produced from steel or stainless steel.
Zewnętrzna obudowa jest wykonana ze stali lub stali nierdzewnej.
The lower pipe is connected with the water resting in the outer casing of the well.