Vertaling van "spi bus" in Pools
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
SPI bus read data signal, if you do not need to the read function, you can not connect it
Sygnał odczytu danych magistrali SPI, jeśli nie potrzebujesz funkcji odczytu, nie możesz go podłączyć
Driver based on the A6282 system allows you to control the alphanumeric segmented display using the SPI bus.
Indeks: SPF-03272 Sterownik oparty na układzie A6282 pozwala kontrolować wyświetlacz alfanumeryczny, segmentowy z wykorzystaniem magistrali SPI.
Using F4 MCU controls OSD over SPI bus in DMA mode.
Korzystanie F4 MCU kontroluje OSD na magistrali SPI w trybie DMA.
These are: CS (Chip Select) signal of a card selection on SPI bus and also INT signal, which is an output of ENC28J60 chip.
Są to: CS (Chip Select) sygnał wyboru karty na magistrali SPI a także sygnał INT, będący z kolei wyjściem z układu ENC28J60.
It works with 3.3 V and 5 V voltage, communicates through the SPI bus.
Pracuje z napięciem 3,3 V i 5 V, komunikuje się poprzez magistralę SPI.
The module is supplied with the voltage from 2 V to 3.6 V, the voltage regulator is communicating through the I2C or SPI bus.
Moduł zasilany jest napięciem od 2 V do 3.6 V, posiada regulator napięcia, komunikuje się poprzez magistralę I2C lub SPI.
Works with a voltage of 3.3 V and 5V, communicates through the SPI bus.
Pracuje z napięciem 3,3 V i 5V, komunikuje się poprzez magistralę SPI.
It communicates via the I2C or SPI bus, it works with voltages of 3.3 V and 5 V, it has a built-in thermometer.
Komunikuje się poprzez magistralę I2C lub SPI, pracuje z napięciami 3,3 V i 5 V, posiada wbudowany termometr.
The system is supplied with the voltage ranging from 3.3 V to 5.5 V, and communicates over the I2C or SPI bus.
Układ zasilany jest napięciem z zakresu od 3,3 V do 5,5 V, komunikuje się przez magistralę I2C lub SPI.
The module communicates using the SPI bus, it is powered with the voltage of 3.3 V. 39,90 zł
Moduł komunikuje się poprzez magistralę SPI, zasilany jest napięciem 3,3 V. 39,90 zł Dostępny
It communicates via the I2C or SPI bus, it is powered from a 1.7 V to 3.6 V. 25,90 zł
Komunikuje się poprzez magistralę I2C lub SPI, zasilany jest napięciem od 1,7 V do 3,6 V. 25,90 zł magnetometr I2C
The SPI bus is available on the onboard 40-pin header.
Magistrala SPI jest dostępna w 40-pinowym gniazdku zintegrowanym na płycie.
It communicates via the I2C or SPI bus, it has the voltage regulator, it is powered with the voltage from 2.5 V to 5 V. 35,90 zł
Komunikuje się poprzez magistralę I2C lub SPI, posiada regulator napięcia, zasilany jest napięciem od 2,5 V do 5 V. 35,90 zł Dostępny