Vertaling van "DIL switch" in Spaans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The sound level can be reduced, if necessary by setting the DIL switch.
El nivel de sonido puede reducirse, si es necesario mediante el establecimiento del interruptor DIL.
The individual address, up to 125, of each call point is set via an eight way DIL switch.
La dirección individual, hasta 125, de cada punto de llamada se establece a través de un interruptor DIL de ocho posiciones.
Addressing via integrated DIL switch.
If you used a 40X2 instead of a 28X2, you would have more pins available, and you could, for example, connect an 8-way DIL switch, with one switch for each zone.
Si usara un 40X2 en lugar de un 28X2, tendría más pines disponibles y, por ejemplo, podría conectar un interruptor DIL de 8 vías, con un interruptor para cada zona.
The Sound level can be lowered if required by setting DIL switch no. to ON.
El nivel de sonido puede reducirse, si es necesario mediante el establecimiento del interruptor DIL. 4 en ON.
Then set the RS-485 address via DIL switch or software and activate the RS-485 two-wire or four-wire mode via jumper settings on the AMC - see Figure 5.10 and Figure 5.12.
A continuación, establezca la dirección del dispositivo RS-485 utilizando el conmutador DIL y active el modo RS-485 de dos o cuatro cables utilizando la configuración integrada en el AMC.
Set the connection mode of the RS-485 using the DIL switch of the AMC-MUX.
Establezca el modo de conexión del dispositivo RS-485 utilizando el conmutador DIL del dispositivo AMC-MUX.
Set the RS-485 address of the AMC using the DIL-Switch - see Section 5.6.3 DIL Switch Address Selector.
Configure la dirección RS-485 del controlador del dispositivo AMC2 mediante el conmutador DIL.
DIL Switch Address Selector The first four DIL switches for address selection define the RS485 address of the AMC2 4Win a RS-485 bus system.
Los primeros cuatro conmutadores DIL para la selección de direcciones definen la dirección RS-485 del dispositivo AMC2 en un sistema de bus RS-485.