Vertaling van "a data byte" in Spaans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Celebrated today in the 256 day of the year, for being the biggest amount of different values represented in a data byte.
Se celebra hoy en el día 256 del año por ser la mayor cantidad de valores diferentes representable en un byte de datos.
In contrast to serial interfaces, parallel data transmission is characterized by sending all 8 bits of a data byte simultaneously as a ground-referenced TTL level ("parallel") over 8 lines.
Al contrario de las interfaces en serie, en la transmisión de datos en paralelo se transmiten los 8 Bit de un byte de datos simultáneamente como nivel TTL referido a la masa ("paralelo") a través de 8 cables.
Transmission of a data byte, a 7-bit address, or either half of a 10-bit address, is accomplished by simply writing a value to SSPBUF register.
La transmisión de un byte de datos, una dirección de 7 bits o cualquiera de las dos mitades de una dirección de 10 bits, se consigue con una simple escritura del valor en el registro SSPBUF.
One issue with this is that in LabVIEW 7.0 and later, when NI-VISA receives a data byte with incorrect parity, it completely replaces the serial data with the error character, which by default is 0.
Un problema con esto es que en LabVIEW 7.0 y versiones posteriores, cuando NI-VISA recibe un byte de datos con paridad incorrecta, reemplaza completamente los datos en serie con el carácter de error, que por defecto es 0.
LabVIEW 6.1 and earlier does not replace a data byte with a parity error replacement byte.
LabVIEW 6.1 y anteriores no reemplazan un byte de datos con un byte de reemplazo de error de paridad.
If the user writes the SSPBUF when a transmit is already in progress (i.e., SSPSR is still shifting out a data byte), then WCOL is set and the contents of the buffer are unchanged (the write doesn't occur).
Microcontrolador PIC16F876 Página 66 Si el usuario escribe el SSPBUF cuando una transmisión todavía está en desarrollo (aún se está sacando un byte de datos), WCOL se activa y el contenido del buffer no variará (no se produce escritura).