This is a number that correlates to an ICMP message type.
Se trata de un número que se correlaciona con un tipo de mensaje ICMP.
The value has a bit set for each ICMP message type which should be filtered out.
El valor tiene un bit activo para cada tipo de mensaje ICMP que debe filtrarse.
A router can drop a packet and not send an ICMP message.
This is an example where you type the ICMP message type number and it causes the router to convert the number to a name.
Este es un ejemplo de dónde usted escribe el número de tipo de mensaje de ICMP y hace que el router convierta el número a un nombre.
Select this option to select one or more ICMP message types.
Seleccione esta opción para seleccionar uno o varios tipos de mensajes ICMP.
Thus the source quench ICMP message acts as flow control in the network layer.
Por lo tanto fuente saciar mensaje ICMP actos como el control de flujo en la capa de red.
If no response is received, it could mean that there is no host at the target address or that the ICMP message type isn't supported by the target host.
Si no se recibe una respuesta, podría significar que no hay un host en la dirección de destino o que el tipo de mensaje ICMP no es compatible con el host de destino.
A packet filter can block all ICMP message types except those that are "unreachable" or "time-exceeded."
Un filtro de paquete puede bloquear todos los tipos de mensaje ICMP excepto los del tipo "inalcanzable" o "tiempo excedido".
A router can generate and send an ICMP message, but the sender ignores the message.
Un router puede generar y enviar un mensaje de ICMP, pero el remitente ignora el mensaje.
A router can generate and send an ICMP message, but the sender ignores the message.
Un router puede generar y enviar un mensaje ICMP, pero el emisor hace caso omiso de dicho mensaje.
When the network signals an error condition to the protocol module (e.g., using a ICMP message for IP) the pending error flag is set for the socket.
Cuando la red señala una condición de error al módulo del protocolo (por ejemplo, usando un mensaje ICMP para IP) se activa la bandera de error pendiente para el conector.
The sending host receives the ICMP message, and when it resends the original data it will use a 1476-byte IP datagram.
El host de envío recibe el mensaje ICMP, y cuando vuelve a enviar las informaciones originales él utilizará un IP datagram 1476-byte.
The sending host receives the ICMP message, and when it resends the original data it will use a 1476-byte IP datagram.
El host emisor recibe el mensaje ICMP, y cuando vuelve a enviar los datos originales, usa un datagrama IP de 1476 bytes.