Therefore, the precautions for the use of high voltage phasing stick are as follows
Por lo tanto, las precauciones para el uso de la palanca de fase de alto voltaje son las siguientes
First, check if the connection points of the parts are loose before using the high voltage phasing stick?
Primero, verifique si los puntos de conexión de las partes están flojos antes de usar la palanca de fase de alto voltaje.
If the indicator of the Phasing Stick is larger, the wire is powered.
When the Phasing Stick is used as an electroscope, one of the rods is connected to any one of the wires, and the other rod is grounded or connected to the other phase wire.
Cuando se usa la palanca progresiva como electroscopio, una de las barras está conectada a uno de los cables, y la otra barra está conectada a tierra o conectada al otro cable de fase.
Second, check the spare parts for dust after using the high voltage phasing stick?
En segundo lugar, verifique que no haya polvo en las piezas de repuesto después de usar la palanca de fase de alto voltaje.
When the high voltage phasing stick is used in the field, carefully check the spare parts to ensure the working efficiency; clean the spare parts dust after use, and reduce the error in the measurement of resistance and voltage.
Cuando se usa la palanca de fase de alto voltaje en el campo, revise cuidadosamente las piezas de repuesto para asegurar la eficiencia de trabajo; Limpie el polvo de las piezas de repuesto después del uso y reduzca el error en la medición de resistencia y voltaje.
Precautions for on-site use of high voltage phasing stick - Domain Knowledge - Huazheng Electric Manufacturing (Baoding) Co.,Ltd
Precauciones para el uso in situ de la palanca de fase de alto voltaje - Conocimiento del dominio - Huazheng Electric Manufacturing (Baoding) Co., Ltd
When the two power supplies are standby power supply each other or have parallel operation requirements, the Phasing Stick should be nuclear phase before being put into operation
Cuando las dos fuentes de alimentación están alimentadas entre sí o tienen requisitos de operación paralelos, la palanca de fase debe ser una fase nuclear antes de ponerse en funcionamiento
When the indicator of the Phasing Stick approaches or is zero, the two phases are in phase; if the indicator of the Phasing Stick is larger, it will be repeated several times.
Next: Precautions for on-site use of high voltage phasing stick
Artículo anterior: Uso correcto del interruptor de aislamiento de alto voltaje
When the equipment is overhauled and it is possible to change the phase sequence, the Phasing Stick should be re-nuclear before it is put into operation.
Cuando se revisa el equipo y es posible cambiar la secuencia de fases, el Fusible debe volver a nuclear antes de ponerlo en funcionamiento.
After the power supply system and equipment are repaired or changed, the Phasing Stick should be use before being put into operation
Después de que el sistema de suministro de energía y el equipo se reparen o cambien, se debe usar el Fusible de fase antes de ponerlo en funcionamiento
When using two or more power supplies, one of the following conditions requires the use of a Phasing Stick for phase sequence
Cuando se utilizan dos o más fuentes de alimentación, una de las siguientes condiciones requiere el uso de un Fusible de fase para la secuencia de fases