Vertaling van "thread end" in Spaans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Holding the thread end, push the bobbin winder shaft to right.
As the culmination of the knot we will pass the thread end through the ring.
The thread end will be on the right side of our palm.
Profile wire slotted tube/water well screen with thread end 8 well casing for sale
Perfil de tubo ranurado de alambre/pantalla de agua de pozo con el final del hilo 8 bien cubierta para la venta
It is often used on the equipment where the screw thread end needs to be covered with special medium.
Es de uso frecuente en el equipo donde el extremo de la rosca de tornillo necesita ser cubierto con medio especial.
The cap nut, including the nut body and the cap attached to the nut body, is suitable for the place where the screw thread end needs to be covered.
La tuerca ciega, incluyendo el cuerpo de la nuez y el casquillo atados al cuerpo de la nuez, es conveniente para el lugar en donde el extremo de la rosca de tornillo necesita ser cubierto.
Clamp end, thread end, weld end
Continuously rotate hand wheel, pull thread end until needle returns to the top position; the lower thread (bobbin thread) is pulled out as shown in the figure.
Gire continuamente la rueda manual, hale el extremo del hilo hasta que la aguja regrese a la posición superior; el hilo inferior del carrete se halará como se muestra en la figura.
Screw thread end ball valve
Hold the thread end and press the foot control.
Sujete el extremo del hilo. Pise el control por pedal.
Previous: 3/4 PVC True union slip X slip ball valve, T/T thread end sch 80 PVC
Anterior: válvula de PVC antideslizante verdadera unión X bola de deslizamiento 2 , el final del hilo T/ T SCH 80 PVC
4 PVC True union slip X slip ball valve, T/T thread end sch 80 PVC - Ehao Plastic Co., Ltd.
La verdadera unión de deslizamiento 4 PVC válvula de bola de deslizamiento X, extremo del hilo T/ T SCH 80 PVC - EHAO Plastic Co., Ltd.
Butterfly ball valve body can be supplied with Weld end Thread end and Clamp end Our butterfly ball valves can be installed with different type handles like 4 position pull handle 12 position gripper handle and 10 more other types or installed with...
El cuerpo de la válvula de mariposa se puede suministrar con el extremo de soldadura, el extremo del hilo y el extremo de la abrazadera. Nuestras válvulas de bola de mariposa se pueden instalar con diferentes mangos de tipo, como manija de tracción...