Excellent quality meter with calibration screwdriver and buffer solution.
Utmärkt kvalitets mätare med kalibrerings skruvmejsel och buffertlösning.
In such a case repeat the test with a buffer solution of higher concentration.
Upprepa i så fall testet med en buffertlösning med högre koncentration.
It is important to use the buffer solution, as it protects the vaccine from the gastric acid.
Det är viktigt att använda buffertlösningen, eftersom den skyddar vaccinet från magsyran.
Drink the vaccine within 2 hours after mixing with the buffer solution.
The catheter is flushed by using 5-10 ml of sterile rinse buffer solution.
Katetern spolas med hjälp av 5-10 ml steril buffertlösning.
Only after successful restoration of the stroke volume measurement can the catheter be flushed with the sterile rinse buffer solution and the pump refilled with insulin.
Först efter en lyckad återställning av mätningen för slagvolymen kan katetern spolas med den sterila buffertlösningen och pumpen återfyllas med insulin.
After calibration, you can perform verification (measure in known buffer solution) to ensure your measurement is accurate.
Efter kalibrering kan du utföra verifikation (mätning i kända buffertlösningar) för att säkerställa att din mätning är korrekt.
Add 5 millilitres of the buffer solution (4.9).
Tillsätt 5 ml av buffertlösningen (4.9).
Add 50 ml of the buffer solution (4.2.1.4) and transfer the compound into a 1000 ml volumetric flask, then make up with doubly distilled water.
Tillsätt 50 ml av buffertlösningen (4.2.1.4), häll över blandningen i en 1000 ml mätkolv och fyll på med dubbeldestillerat vatten.
10 ml of the buffer solution (4.1)
10 ml buffertlösning (4.1).
Add the vaccine to the buffer solution.
Häll vaccinet i buffertlösningen.
Add to the sample 10 ml of buffer solution (2.2.1), 5 ml of neutral methylene blue solution (2.2.2) and 15 ml of chloroform (2.2.4).
Tillsätt 10 ml buffertlösning (2.2.1), 5 ml neutral lösning av metylenblått (2.2.2) och 15 ml kloroform (2.2.4).
If an internal standard is being used add 1,00 ml of internal standard (3.27.3) for each 100 ml final solution and make up to the mark with the buffer solution (3.24).
Om en intern standard används, tillsätt 1,00 ml av denna (3.27.3) för varje 100 ml färdig lösning och späd till märket med buffertlösningen (3.24).