Vertaling van "libusb" in Pools
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
emu libusb support removed (was broken and unmaintained).
Usunięto wsparcie emu libusb (zostało złamane i niewymagane)
Interface 01 is the one that handles bulk transfers and appropriate driver (libusb) is included in DLL archive.
Interfejs 01 jest interfejsem obsługującym transfer bulk i odpowiadający mu sterownik (libusb) jest zawarty w pakiecie.
Those of you who want to port libusb to a specific OS, should take a look at the PORTING file found inside the source archive.
Ci z was, którzy chcą portu libusb do konkretnego systemu operacyjnego, należy zapoznać się z pliku Porting występującym w archiwum źródłowego.
But if we want to us it with AvrDude, then install the LIBUSB driver.
Jeśli chcemy pracować z AvrDude, instalujemy sterownik LIBUSB.
Requires.NET Framework v4.0 LibUSB (only if you want recovery detection, otherwise not needed) iTunes 9.2 or later Thanks to a comment...
Wymaga.NET Framework v4.0 libusb (tylko w przypadku wykrycia odzysku, w przeciwnym razie nie jest to konieczne) iTunes 9.2 lub nowsza Dzięki...
Added a function for fast switching between Jungo (Avr/Atmel Studio) and LibUSB (AvrDude) driver, in one FirmWare.
Dodanie funkcji szybkiego przełączania pomiędzy sterownikiem Jungo (Avr/Atmel Studio) i LibUSB (AvrDude) na tym samym FirmWare.
Apogee CCDs: Only USB versions are supported. You must have libusb installed.
new libusb library and optimize USB communication, - autodetection communication errors for FLASH SPI 25x - also for read operation (e.g. lost conctact pin during in circuit operation with clip),
nowe wersje bibliotek libusb + optymalizacja transmisji USB (sterowniki USB bez zmian), - wykrywanie błędów komunikacji FLASH SPI 25x (np. niekontaktujące piny w układzie) również podczas odczytu,
Notice: if avrdude shows message about not finding device with VID = 0x16C0, PID = 0x05DC but you can see usbasp under device manager and it's VID/PID pair is the same as required by avrdude, update libusb driver to 0.1.12.1 version.
Uwaga: jeżeli avrdude wyświetla komunikat, że nie znaleziono urządzenia VID = 0x16C0, PID = 0x05DC ale usbasp jest widoczny w menedżerze urządzeń i posiada zgodne VID/PID zaktualizuj sterownik do wersji 0.1.12.1.
You have a Logitech Mouse connected, and libusb was found at compile time, but it was not possible to access this mouse. This is probably caused by a permissions problem - you should consult the manual on how to fix this.
Wykryto podłączoną mysz Logitech, a obsługa libusb jest wkompilowana, ale brak dostępu do myszy. Najprawdopobniej oznacza to problem z uprawnieniami - proszę zajrzeć do podręcznika. NAME OF TRANSLATORS