inglês

alemão árabe catalão checo chinês coreano dinamarquês eslovaco espanhol farsi francês grego hebraico hindi húngaro inglês italiano japonês neerlandês polonês português romeno russo sueco tailandês turco ucraniano vietnamita

chinês

Definição alemão árabe catalão checo chinês coreano dinamarquês eslovaco espanhol farsi francês grego hebraico hindi húngaro inglês italiano japonês neerlandês polonês português romeno russo sueco tailandês turco ucraniano vietnamita

Favoritos

repeat request

Tradução de "repeat request" em chinês

Não foi possível encontrar esta entrada. Mostrando resultados aproximados. Verifique a ortografia ou proponha a adição deste termo ao dicionário.

重传请求

重发请求

Error correction may generally be realized in two different ways: Automatic repeat request (ARQ) (sometimes also referred to as backward error correction): This is an error control technique whereby an error detection scheme is combined with requests for retransmission of corrupted data.

错误纠正通常可以用两种方式实现：自动重传请求（ARQ），有时也称后向纠错：这是一种错误控制技术，其中将错误检测方案与重传错误数据的请求组合。

This is known as automatic repeat request (ARQ), and is most notably used in the Internet.

这也称之为自动重传请求（ARQ），它在互联网中极为常用。

Automatic repeat request schemes may be used to retransmit lost or corrupted data.

自动重发请求方案可用于重新传输丢失或损坏的数据。

CAN bus, ALOHAnet, Ethernet, etc., all experience occasional bus contention in normal operation, but use some protocol (such as Multiple Access with Collision Avoidance, carrier-sense multiple access with collision detection, or automatic repeat request) to minimize the times that contention occurs, and to re-send data that was corrupted in a packet collision.

CAN总线、ALOHAnet、以太网等在正常运作中偶尔会遇到总线争用，但会使用一些协议（例如避免碰撞的多路访问（英语：Multiple Access with Collision Avoidance）、具有碰撞检测的载波侦听多路访问、自动重发请求）最小化争用时间，并重新发送在数据包冲突（英语：Packet collision）中被破坏的数据。

automatic repeat request system

自动请求重发方式

Automatic repeat request (ARQ) schemes have been widely applied to many digital communication systems, especially, computer communication networks...

自动请求重传（ARQ）方法已经在许多数字通信系统特别是通信网中获得了广泛的应用。

An alternate approach for error control is hybrid automatic repeat request (HARQ), which is a combination of ARQ and error-correction coding.

用于替代错误控制的一种方案是混合式自動重送請求（HARQ），它是ARQ与错误纠正编码的组合。

The Ombudsperson must also determine initially whether the request constitutes a new or repeat request.

监察员还必须首先断定该请求为新请求还是重复请求。

ARQ and FEC may be combined such that minor errors are corrected without retransmission, and major errors are corrected via a request for retransmission: this is called hybrid automatic repeat request (HARQ).

ARQ与FEC可以组合，使得不需重传就纠正微小错误，并经由重传请求校正大的错误，这被称为混合式自動重送請求（HARQ）。

Applications that require low latency (such as telephone conversations) cannot use Automatic Repeat reQuest (ARQ); they must use forward error correction (FEC).

需要低延迟的应用程序（如电话通话）不能使用ARQ；它们必须使用前向錯誤更正（FEC）。

The first determining module is configured for determining whether hybrid automatic repeat request acknowledgement information and the determined channel state information to be detected should be included in the information transmitted on physical uplink control channel for transmitting hybrid automatic repeat request acknowledgement information

第一判断单元，用于判断传输混合自动重传确认信息的物理上行控制信道上传输的信息中是否应该包括混合自动重传确认信息和确定的待检测的信道状态信息；