Load the module by hand using the command modprobe module-name, or put an entry in/etc/modprobe.conf.
Laad de module handmatig met het commando modprobe module-name, of voeg een regel toe in/etc/modprobe.conf.
Alte rezultate
Both modprobe commands don't give any output if successful, so if the normal prompt returns, the module got loaded fine.
Als je van de modprobe commando's geen meldingen ziet dan is alles prima en de module werd geladen.
If there's no device, you probably have to load a device driver module like "ide-scsi" with a command like "modprobe ide-scsi".
Als er geen device is, moet je waarschijnlijk een device driver module als "ide-scsi" laden met een commando als "modprobe ide-scsi".
This line is closed with 'sb', so I know that the command 'modprobe -k sb' initializes the soundcard services.
Achter deze regel staat 'sb', dus weet ik dat ik met 'modprobe -k sb' mijn geluidskaart in de lucht krijg.
Perhaps you will need to add some modprobe commands if you don't use kerneld or the kmod feature of new kernels 2.2.x
Misschien dat je een aantal modprobe opdrachten toe moet voegen als je noch gebruik maakt van kerneld noch van de kmod faciliteit van de nieuwere kernels 2.2.x.
'modprobe -k sb' This command loads the module 'sb', which installs my soundcard (a SoundBlaster AWE 64).
Met deze opdracht wordt de module 'sb' geladen, waardoor mijn geluidskaart (een SoundBlaster AWE 64) geinstalleerd wordt onder Linux.
Conținut posibil inadecvat
Exemplele au rolul de a te ajuta să traduci cuvinte sau expresii corect si adaptat la context. Nu sunt selectate sau validate manual, așadar pot conține termeni inadecvați. Te rugăm să raportezi exemplele pe care le consideri inadecvate. Traducerile vulgare sau colocviale sunt în general marcate cu roșu sau cu portocaliu.
Nici un rezultat pentru acest sens.
Sinonime și analogii pentru "command modprobe" în limba Română