Determination of the efficiency of the vehicle's emission control system by measuring the lambda value and the CO content of the exhaust gases in accordance with section 4 or with the procedures proposed by the manufacturers and approved at the time of type-approval.
determinazione dell'efficienza del sistema di controllo delle emissioni dei veicoli mediante misurazione del valore lambda e del tenore di CO nel gas di scarico in conformità del punto 4 o delle procedure proposte dal costruttore e approvate all'atto dell'omologazione.
Environmentally protective with low levels of waste and the ability to be recycled with little effort, this chemically resistant foam solution has a lambda value of 0.036 W/(mk).
Ecologica, con bassi livelli di scarto e facilmente riciclabile, questa soluzione in schiuma chimicamente resistente è caratterizzata da un valore lambda di 0,036 W/(mK).
A lambda value of 1.0 means in theory all of the oxygen has combusted, or the ideal pre-combustion fuel to air ratio of 14.7 parts air to one part premium-grade petrol has been achieved.
Un valore di lambda pari a 1.0 significa in teoria che tutto l'ossigeno è stato bruciato, oppure che è stato raggiunto il rapporto carburante/ aria di pre-combustione ideale di 14,7 parti di aria con una parte di benzina di qualità premium.
The lambda value improved up to a 20%.
The lambda value shall be displayed with a resolution of 0,001.
Moreover, an exhaust gas analyser calculates the lambda value from the volume fractions of the components of the exhaust gas.
Inoltre, un analizzatore di gas di scarico calcola il valore del parametro da frazioni volumetriche dei componenti del gas di scarico.
Here, the task was to get the exact lambda value of insulbar LO (0.18 W/m*K), or to get as close to it as possible, using buzzers.
Per vincere bastava, premendo il buzzer, riuscire a toccare esattamente il valore lambda di insulbar LO (0,18 W/m*K) o avvicinarcisi il più possibile.
With a lambda value of just 0.18 W/m·K, it permits a better Uf value when retaining the same frame installation depth, or a smaller installation depth with the same Uf value.
Con un valore lambda di soli 0,18 W/m·K, il nuovo profilo rende possibile un migliore valore Uf con la stessa profondità di telaio oppure una minor profondità di telaio con il medesimo valore Uf.
The profile is produced from foamed, glass fibre reinforced polyamide (PA 66 GF). Compared with insulating profiles made from solid polyamide, the lambda value of insulbar LI can be reduced to as little as 0.21 W/(m⋅K).
Rispetto ai profili isolanti tradizionali, in poliammide solida, il valore lambda di questo profilo - realizzato in poliammide espansa rinforzata con fibre di vetro (PA 66 GF) -, può essere ridotto a 0,21 W/(m⋅K).
Magic threshold exceeded: lowest lambda value of 0.0199 W/mK
La soglia fatidica è stata superata: 0,0199 W/mK, il valore Lambda più basso in assoluto
To be considered for certification in Belgium it is necessary to produce a lambda value that is almost twice as high (in order to reach the standard of K15 for carbon-neutral dwellings).
Al fine di ottenere una certificazione, in Belgio occorre utilizzare un valore di lambda quasi doppio (per rispettare la norma del K15 per le case passive).
The low lambda value (0.18 W/m⋅K) is achieved by means of pore-like cavities in a glass fibre reinforced polymer blend (PA 66 and PPE)
Il basso valore lambda (0,18 W/m·K) viene ottenuto grazie a cavità simili a pori all'interno di un blend di polimeri (PA 66 e PPE) rinforzato con fibre di vetro
Compared with standard profiles made from solid polyamide, the lambda value of insulbar LI can - in optimum products - be reduced from 0.3 W/mK to 0.21 W/mK*.
Rispetto ai profili standard in poliammide solida, il valore lambda di insulbar LI nell'optimum del prodotto può essere ridotto da 0,3 W/mK a 0,21 W/mK*.