Wählen Sie jetzt einen Sendepuffer aus, indem Sie den Befehl 'sw' ausführen.
Now select a transmission buffer via the command 'sw'.
Standardabweichung innerhalb der Analysenserie, sw und hauseigene Präzisionsgrenze,
the within-run standard deviation sw, and in-house precision limit,
Poster Ich habe heute leider kein Foto für dich sw
Quote I have today unfortunately no photo for you sw
Foto&Bild | outdoor, sw, bokeh Bilder auf fotocommunity...
photo&image | outdoor, sw, bokeh images at photo community...
Diese Studie untersucht einen dieser Korrekturfaktoren, nämlich das Verhältnis des Bremsvermögens von Wasser und Luft, sw, air.
This study deals with one of this beam quality correction factors, the stopping power ratio between water and air, or sw, air.
Andernfalls erhalten Sie mit 'sw' eine Liste mit den 500 Sendepuffern.
Otherwise you get a list of the 500 message buffers via 'sw'.
Sind die Ergebnisse nach Überzeugung des Laboratoriums frei von Ausreißern, so wird die Standardabweichung sw innerhalb der Analysenserie wie folgt errechnet
Once the laboratory is satisfied that data are free from outliers, the within-run standard deviation sw is obtained as follows
Die hauseigene Präzisionsgrenze ist 2,8 sw.
The in-house precision limit is 2.8. sw.
Der Parkplatz ist groß genug für 508 sw.
The parking lot is big enough for 508 sw.
Das Konsolen Kommando "sw:cron:run" führte unseren Cronjob aus und verursachte einen Fehler.
The console command "sw: cron: run" caused an error on running cronjob.
Auf beiden Blockseiten müssen die Rückmelder und Signale zwischen dem Block und der nächsten Weiche (sw) positioniert sein.
On both sides of the block, the sensors and signals must be positioned between the block and the next turnout (sw).
Bild 10 versucht die Ausdehnung der durch sp und sw sowie Modifikatoren beeinflussten weissen Farbe aufzuzeigen.
Fig. 10 attempts to illustrate the expression of white caused by sp and sw and modifiers.
Die Swap-Partitionen sind auf verschiedene Festplatten zu verteilen und mit den Optionen sw, pri=1 in/etc/fstab zu mounten.
Spread them on different drives and mount all of them with sw, pri=1 options in/etc/fstab.