Engels

Arabisch Catalaans Chinees Deens Duits Engels Frans Grieks Hebreeuws Hindi Hongaars Italiaans Japans Koreaans Nederlands Oekraïens Perzisch Pools Portugees Roemeens Russisch Slowaaks Spaans Thai Tsjechisch Turks Vietnamees Zweeds

Chinees

Definitie Arabisch Catalaans Chinees Deens Duits Engels Frans Grieks Hebreeuws Hindi Hongaars Italiaans Japans Koreaans Nederlands Oekraïens Perzisch Pools Portugees Roemeens Russisch Slowaaks Spaans Thai Tsjechisch Turks Vietnamees Zweeds

Favorieten

Publiciteit

current loop

Vertaling van "current loop" in Chinees

电流环路

电流回路

电流环

电流回路表

This will allow the user to ground both the sensor and one side of the current loop.

这样用户就可以同时将传感器及电流环路 的一端接地。

An internal can be integrated with other signals or current loop

◈ 内部可以集成其他信号或者电流环路

Each measuring device provides its "main" measured value on the current loop of the standard signal.

每一个测量设备可以提供电流回路标准信号的测量值。

Since the electrons may move completely around the cathode surface, a large electron current loop or band 12 is formed.

因为电子可完全地围绕着阴极表面运动，形成了一大的电子电流回路或带12。

Independent current loop control to realize true torque control, supporting online switching of torque control and speed control.

独立的电流环控制实现真正的转矩控制，支持转矩和速度控制在线切换。

A current control section 22 performs current loop control to control the operation of the servomotor 24x through the amplifier 23x.

电流控制部22执行电流环控制，以便通过放大器23x控制伺服马达24x的操作。

the controller provides a command directly to the current loop to directly control the torque applied by the motor.

在"力矩/电流模式"中，控制器直接向电流环路提供命令以便直接控制由电机施加的扭矩。

The loop current sense amplifier of the system can be configured to provide a loop current sense signal corresponding to a loop current in the current loop, and further can comprise a processor in electrical communication with the loop current sense amplifier.

系统的回路电流读出放大器被配置成提供与电流回路中的回路电流对应的回路电流感测信号，并且可以进一步包括与回路电流读出放大器电通信的处理器。

The current loop detection system 1 comprises a characteristic load 11, a current measuring apparatus 13 and a user apparatus 15.

电流回路检测系统1包含一特征负载11、一电流量测装置13以及一使用者装置15。

For current loop when bridging

2）跨接时用于电流回路

This type of transmitter will optoelectronically isolate the sensor signal from the output current loop.

这种变送器会以光电方式将传感器信号与输出电流环路隔离。

Referring to FIG. 1, the numerical controller, similar to conventional numerical controllers, includes a numerical control section 1 and a motor control section 2. The motor control section 2 performs position and speed loop control of a servomotor 3 according to move commands issued from the numerical control section 1 and further performs current loop control of the servomotor 3 to control the position and speed of the servomotor 3 (and the control axis driven by the servomotor 3).

图1所示的数值控制装置与现有的数值控制装置相同，由数值控制部1和伺服控制部2构成，根据从数值控制部1所指令的移动指令，伺服控制部2进行伺服电动机3的位置/速度环控制，而且还进行电流环控制，来控制伺服电动机（由该伺服电动机驱动的控制轴）的位置/速度。

A. Upon completion of secondary wiring, perform system test on each loop, check whether current loop is correct and whether there is correct indication on impressed current meters.

A. 二次接线完毕后，逐个回路进行系统试验，检查电流回路是否正确，外加电流核查表记指示有没有，是否正确。