Gesproken tekst vertalen, offlinefuncties, synoniemen, vervoegingen, educatieve spelletjes
Publiciteit
Registreer gratis: toegang tot meer resultaten en functies
minimum yield
Vertaling van "minimum yield" in Chinees
最低产量
最低屈服
最小屈服
At least a minimum yield is guaranteed even under difficult conditions.
即使在恶劣条件下起码的最低产量得到保障。
For minimum yield guarantees, please review our Standard DNA Oligos offering.
关于最低产量保证，请查看我们的标准DNA寡核苷酸 产品。
The specified minimum yield is greater than the target yield.
目标收率比指定的下限收率低。
The allowable tensile stress used in the design of the pressure components, excluding bolting, for any material shall not exceed 0.25 times the minimum ultimate tensile strength or 0.67 times the minimum yield strength for the material whichever is lower across the full range of specified operating temperature.
承受因压力导致的拉伸应力的零部件（螺栓除外）设计，无论使用任何材料，在规定的全部操作温度范围内零件受 到的拉伸应力不得超过0.25倍材料最低极限拉伸应力或0.67倍材料最低屈服应力（取二者之中的最低值）。
Stresses on any gate component resulting from a stalled hoist motor at the motor breakdown torque or jammed gate with inoperative pressure relief or overload device(s), in combination with any other loads, shall not exceed 90% of the guaranteed minimum yield stress of the materials.
在电机极限转矩处由于失速升降电机导致任何闸门组件的应力，以及不可操作的卸压或过载设备干扰闸门上的应力，与其他任何负载之和，不应超过材料担保的最小屈服压力。
Welding consumables, in addition, shall be such that they produce weld metal which, when tested in accordance with the applicable method given in BS 709, has a minimum yield stress and minimum tensile strength at least equal to those of the parent metal.
焊接消耗品焊接的金属在根据《英国标准》第709条中的可适用方法测试时，最低屈服应力和最小拉力强度至少等于底层金属的屈服应力和拉力强度。
For casing joint bolting, the allowable stress, as determined in 6.3.1.2 shall be used to determine the total bolting area based on hydrostatic load and gasket preload, as applicable. The preload stress shall not exceed 0.75 times the bolting material minimum yield strength.
对于连接泵体的螺栓的许用应力，应按照6.3.1.2的要求基于泵体螺栓连接处承受的液压作用力和密封垫所需的预 紧力进行计算校核。螺栓预紧力不应超过超过螺栓材料最低屈服强度的0.75倍。
7.4.10.1 The lifting lugs and attachment methods shall be designed using a maximum allowable stress of one -third of the specified minimum yield strength of the lifting lug welds shall be inspected by either liquid penetrant or magnetic particle testing.
吊耳及其连接方式设计的最大许用应力应不大于对应材料最小屈服强度的1/3.每一个吊耳焊接都应采用磁粉探伤或 者液体渗透检查。
All concrete reinforcement bars shall be coated/ uncoated as per table 1 of SAES-Q-001, based on the exposure type defined in the Geotechnical report, high tensile deformed steel bars with minimum yield strength of 60 KSI as per SAUDI ARAMCO Engineering Standard SAES-Q-001 & 09- SAMSS-106.
所有混凝土钢筋和最小屈服强度为60 KSI的高强度螺纹钢筋应分别根据SAES-Q-001表1和沙特阿美石油公司工程标准SAES-Q-001和09- SAMSS-106，基于岩土工程勘察报告中定义的裸露类型，选择涂敷/不涂覆涂料。
The production yield gives the expected rate of products meeting the specification requirements, i.e. products with the resulting closed component dimension within the interval set by the required limit sizes. In common engineering, the manufacturing process is usually considered satisfactorily efficient on the level of 3s, i.e. the process with a minimum yield of 99.73%.
生产良率给出符合规格要求产品的期望比率，也就是说封闭零件的结果尺寸在目标极限尺寸的区间内。 在通常的工程领域，加工制程通常3б是有效的，也就是最小良率为99.73 % 。
MINIMUM YIELD OF THE NEW NOTES -奥门金沙4066 More
申银万国投资者调研 -4066金沙网址 更多
Ga naar Premium voor toegang tot miljoenen vertaalvoorbeelden, onbeperkt woorden opslaan en leren, zonder advertenties.
Synoniemen voor minimum yield in het Engels
Woord & uitdrukking van de dag
Afbeelding van de dag
Suggesties
Resultaten: 11. Exact: 11. Verstreken tijd: 11 ms.
