Vertaling van "7 data bits" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Both port formats can be configured for 7 data bits.
Beide Schnittstellenformate können auf 7 Datenbits eingestellt werden.
msgid "The 'space' parity checking is only supported with 7 data bits."
+"Die 'Leerzeichen'-Paritätsprüfung wird nur mit 7 Datenbits unterstützt."
7 data bits with the least significant bit sent first
7 data bits, odd or even parity, 1 or more stop bits
7 Datenbits, gerade oder ungerade Parität, 1 oder mehr Stopbits,
Due to automatical stop-bit identification the following bit patterns are received correctly:1) 7 data bits, no parity, 2 or more stop bits,
The switch settings that follow are for the default serial protocol: 9600 baud, 7 data bits, even parity, and one stop bit.
Für das serielle Standardprotokoll gelten die folgenden Schaltereinstellungen: 9600 Baud, 7 Datenbits, 1 Stoppbit und gerade Parität.
For the 7475, set the switches as shown in the following table to configure the plotter for the default settings of 9600 baud, 7 data bits, even parity, and one stop bit.
Beim 7475-Modell stellen Sie die Schalter gemäß der folgenden Tabelle ein, damit der Plotter auf die Vorgabeeinstellungen 9600 Baud, 7 Datenbits, gerade Parität und ein Stoppbit konfiguriert wird.
Incorrect interface parameters: make sure that the device is using the same transmission rate and the same mode (8N1 = 8 data bits, no parity, 1 stop bit or 7E1 = 7 data bits, even parity, 1 stop bit).
Schnittstellenparameter falsch: Stellen Sie sicher, dass das Gerät mit der gleichen Baudrate und im gleichen Mode (8N1 = 8 Datenbits, keine Parität, 1 Stoppbit oder 7E1 = 7 Datenbits, gerade Parität, 1 Stoppbit) sendet.
For all other CalComp pen plotters, set the plotter controller for 9600 baud, even parity, 7 data bits, 1 stop bit, no hardware handshake, and checksum on.
Bei allen anderen CalComp-Stiftplottern verwenden Sie in der Plottersteuerung folgende Einstellungen: 9600 Baud, gerade Parität, 7 Datenbits, 1 Stoppbit, kein Hardware-Handshake und Prüfsumme ein.
Set the Hewlett-Packard plotters at 9600 baud with 7 data bits, 1 stop bit, and even parity.
Stellen Sie die Hewlett-Packard-Plotter auf 9600 Baud, 7 Datenbits, 1 Stoppbit und gerade Parität ein.
1 stop bit, 7 data bits for Chemistry Systems; 1 stop bit, 8 data bits for the
1 Stoppbit, 7 Datenbits für Chemistry Systeme; 1 Stoppbit, 8 Datenbits für das
A few service providers use 7,E,1 (7 data bits, E ven parity, and 1 stop bit).
Manche Dienstanbieter verwenden 7 , Gerade , 1 (7 Datenbit, Gerade Parität und 1 Stoppbit).
Andere resultaten
Most characters are transmitted in 7 or 8 data bits.
Die meisten Zeichen werden mit 7 oder 8 Datenbits übertragen.