Vertaling van "BAIO socket" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
After installing the BAIO spigot end in the BAIOsocket the twist lock device shall pushed with the marked nose first into one of the four recesses of the BAIO socket and knocked in by means of a mallet using a suitable block (e.g. block of softwood).
Nach der Montage des BAIO-Spitzendes in der BAIO-Muffe ist die Entriegelungssicherung mit der beschrifteten Nase voran in eine der vier Aussparungen der BAIO-Muffe einzustecken und unter Verwendung einer geeigneten Beilage (z.B. Weichholz- oder PE-Klotz) mit einem Hammer einzuschlagen.
Subsequently the PE/PVC pipe shall be pushed through the dirt gasket for sockets and the GKS gasket into the BAIO socket as far as it will go.
Anschlie├čend ist das PE/PVC-Rohr durch die Muffen-Schmutzdichtung und GKS-Dichtung bis auf Anschlag in die BAIO-Muffe einzuschieben.
Prior to installation of the pipe the dirt gasket for sockets shall be inserted into the BAIO socket (see figure).
Due to the contour of the BLD, the forces for pushing a BAIO spigot end, a PE fusion end or a DCI pipe into a BAIO socket, are much lower than those required for conventional DCI pipe gaskets.
Bei der Montage der BAIO-Spitzenden, PE-Einschwei├čenden oder Gussrohren in BAIO-Muffen sind aufgrund der Kontur der BLD wesentlich geringere Einschubkr├Ąfte erforderlich als bei herk├Âmmlichen Gussrohr-Dichtungen.
BAIO socket DN 150/d 180: including GKS gasket for the connection of PE pipes D 180, or in connection with BAIO spigot socket gate valve DN 150/d 180 (model no.
BAIO-Muffe DN 150/d 180: inklusive GKS-Dichtung f├╝r den Anschluss von PE-Rohren D 180 oder in Verbindung mit BAIO-HSM-Schieber DN 150/d 180 (Best.-Nr.
Note: PE push-in end with DCI pipe outside diameter, suitable for BAIO socket with DCI gasket
Achtung: PE-Einsteckende mit Gussrohr-Aussendurchmesser, passend f├╝r BAIO-Muffe mit nichtrostendem Stahl
Medium: potable water, sewage water Max. operating pressure: 16 bar BAIO socket including GKS gasket for connection of PE pipes acc. to DIN 8074 and PVC pipes acc. to DIN 8062.
12 N/mm┬▓ nach Hei├čwasserlagerung, Nachweis der Trinkwassertauglichkeit, Dichtung f├╝r den Anschluss von PE-Rohren nach DIN 8074 und PVC-Rohren nach DIN 8062.
Saddle seal for double-strap saddles with female thread 2 1/2", 3", flange DN 80, BAIO socket DN 80 Medium: potable water, gas, sewage water Nominal width of main pipe: DN 250
Satteldichtung f├╝r Doppelb├╝gelschellen mit Innengewinde 2 1/2", 3", Flansch DN 80, BAIO-Muffe DN 80 Medium: Trinkwasser, Gas, Abwasser Nennweite Hauptrohr: DN 250
BAIO socket including BAIO lip seal (BLD) for water, suitable for: BAIO spigot ends, CI pipes acc. to EN 545, steel pipes with outside diameter of CI pipe, PE electrofusion fitting, steel welding fitti × Copy
BAIO-Muffe inklusive BAIO-Lippendichtung (BLD) f├╝r Wasser, Verwendung: BAIO-Spitzenden, Gussrohre nach EN 545, Stahlrohre mit Gussrohrau├čendurchmesser, PE-Einschwei├čende, Stahl-Einschwei├čende
BAIO socket including GKS gasket for connection of PE pipes acc. to DIN 8074 and PVC pipes acc. to DIN 8062
BAIO-Muffe inklusive GKS-Dichtung f├╝r den Anschluss von PE-Rohren nach DIN 8074 und PVC-Rohren nach DIN 8062