Vertaling van "DIMMs into" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Furthermore, this motherboard does not restrict the memory size across two channels. Users may install different memory size DIMMs into the two channels and enjoy dual-channel and single-channel functions at the same time.
Ohne Beschränkung der Speichergröße über beide Kanäle hinweg ermöglicht das Motherboard die Installation von DIMMs verschiedener Speichergröße und die Verwendung der DualChannel-Funktion zur gleichen Zeit.
Uniquely designed memory expansion riser enables to place up to 16 DIMMs into one system.
Speichererweiterungskarte mit einzigartigem Design ermöglicht das Platzieren von bis zu 16 DIMMs in einem System.
FB-DIMMs change the parallel architecture of today's Registered DIMMs into a serial point-to-point connection.
Important: When installing SDRAM DIMMs into the computer, press the DIMM up into the slot with your thumbs; do not use the DIMM ejector clips.
Andere resultaten
Insert the notched end of the DIMM into the socket.
Führen Sie das eingekerbte Ende des DIMM in die Fassung ein.
Do NOT rock the DIMM into the seated position.
Press the DIMM into the socket until the clips lock into the DIMM.
Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated.
Stecken Sie das DIMM-Modul fest in den Steckplatz ein, bis die Haltebügel zurückschnappen und das DIMM-Modul richtig sitzt.
3 Align then insert the DIMM into the socket.
DO NOT force a DIMM into a socket in the wrong direction to avoid damaging the DIMM.
Stecken Sie ein DIMM NICHT gewaltsam in einen Steckplatz, da es sonst beschädigt werden könnte...
Trying to push the DIMM into the slot using the ejector clips may damage the SDRAM DIMM.
Wenn Sie versuchen, das DIMM-Modul mit den Auswurfverriegelungen in den Steckplatz zu drücken, kann das SDRAM DIMM-Modul beschädigt werden.
Reinsert the memory module by pressing down on the outer edges of the memory DIMM until the socket ejectors lock the memory DIMM into place.
Setzen Sie das Speichermodul wieder ein, indem Sie den Außenrand des Speicher-DIMMs nach unten drücken, bis dieses in die Sockelklammern einrastet.
Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated.
Drücken Sie das DIMM-Modul gleichzeitig auf beiden Seiten, bis die Haltebügel zurückschnappen und das DIMMModul nicht mehr weiter geschoben werden kann, um das richtige Sitzen des Moduls zu gewährleisten.