Examples with "M code or" and their translation in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The rapid traverse rate limit function limits the rapid traverse rate according to setting in the M code or on the Professional 5 screen.
Die Funktion Eilgangbegrenzung begrenzt die Eilganggeschwindigkeit gemäß der Einstellung im M-Code oder am Professional 5 Bildschirm.
Andere resultaten
Events can be placed at any position of a feature. Comments or machine instructions, e.g. M-codes, G-codes or arbitrary nc-sets can be inserted at these points.
Innerhalb einer Bearbeitung können sogenannte Ereignispunkte gesetzt werden an denen Kommentare oder Maschinenbefehle wie M-Codes, G-Codes oder beliebige NC-Sätze eingefügt werden können.
The system can be activated via M-code or directly from the control pendant, and there are settings to control the interval and duration of the auger cycle for automatic operation.
Es gibt Einstellungen, um das Intervall und die Dauer des Förderzyklus für den automatischen Betrieb zu steuern, und das System kehrt automatisch um, wenn ein Stau auftritt. Schnelles Entfernen von Spänen
This M code starts mist coolant or air blower.
Dieser M-Code startet Kühlmittelnebel oder Blasluft.
Activated via M-code, or from the control pendant
The base coolant can also be started and stopped by using the buttons on the main operation panel or M codes.
Das Basis-Kühlmittel kann auch durch Betätigen der Tasten auf dem Hauptbedienfeld oder der M-Codes gestartet oder gestoppt werden.
Operates automatically via M-code, or manually via a button on the control pendant
The center-trough conveyor can also be started and stopped by using the button on the Function screen or M codes.
Der Mittenwannenförderer kann auch mit der Taste auf dem FUNKTION Bildschirm oder mit M-Codes gestartet und gestoppt werden.
The Auto Door opens the machine doors automatically via an M-code, or can open them manually via a button on the control pendant.
Diese automatische Bedienertür öffnet die Maschinentüren automatisch über einen M-Code oder sie können manuell über eine Taste am Bedienpult geöffnet werden.
The consumer can find the meter reading on his power or gas meter directly under or above the kWh code or m³ on a cyclometer register that runs at different speeds or on a numeric display.
Zählerstand An seinem Strom- oder Gaszähler findet der Verbraucher den Zählerstand direkt unter- oder oberhalb der Kürzel kWh oder m³ auf einem mit unterschiedlicher Geschwindigkeit laufenden Rollen-Zählwerk oder einer Ziffernanzeige.
Specify M921 as M code without buffering, or specify G53 (for pre-reading prevention) following the M code.
Zwischenspeicherung vor, oder geben Sie G53 (für Vorauslesende Verhütung) hinter dem M-Code vor.
Specify M920 as M code without buffering, or specify G53 (for pre-reading prevention) following the M code.
Geben Sie M920 als M-Code ohne Zwischenspeicherung vor oder geben Sie G53 (zur vorauslesenden Verhütung) hinter dem M-Code vor.
To view the output data immediately after execution of M code, specify M483 as M code without buffering, or specify G53 (for pre-reading prevention) following the M code.
Zum Betrachten der Ausgabedaten sofort nach Ausführung des M-Codes geben Sie M483 als M-Code ohne Zwischenspeicherung vor, oder geben Sie G53 (für vorauslesende Verhütung) hinter dem M-Code vor.