Examples with "RCA4 Command" and their translation in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
This section describes the RCA4 Command Line Interface (CLI).
Refer to Chapter 2, 'Configuring Serial Port Settings' for an introduction to the RCA4 Command Line Interface.
In Abschnitt 2 "Konfiguration der Einstellungen für den seriellen Port" bzgl. näherer Informationen zur CLI der RCA4 nachsehen.
This section contains a complete description of each RCA4 command.
Dieser Abschnitt enthält eine komplette Beschreibung jedes RCA4-Befehls.
Chapter 4, 'The RCA4 Command Line Reference' contains detailed information on the RCA4 command language.
The RCA4 command line interface (CLI) is a language that you use to communicate with the RCA4.
Andere resultaten
The following commands can be used to configure and operate the RCA4.
Mit den folgenden Befehlen kann die RCA4 konfiguriert und betrieben werden.
To test network connectivity of your RCA4, enter the ping command.
Verwenden Sie den Ping-Befehl, um die Netzwerkverbindung Ihrer RCA4 zu prüfen.
For example, to immediately reboot the RCA4, use the following command
Der folgende Befehl wird z. B. zum sofortigen Reboot der RCA4 verwendet
the RCA4 will display a list of CLI commands.
The RCA4 can also be configured directly from a TELNET Command Line Interface (CLI).
Die RCA4 kann auch direkt von einer TELNET-CLI konfiguriert werden.
Use this command to terminate your RCA4 session and disconnect from the RCA4.
These commands are used to control your session with the RCA4 CLI or with the attached serial device.
Diese Befehle werden verwendet, um Ihre Sitzung mit der RCA4-CLI oder mit dem angeschlossenen Gerät zu steuern.
This example shows a ping command for a RCA4 with IP address 192.168.0.5.
Im folgenden Beispiel wird ein Ping-Befehl für eine RCA4 mit einer IP-Adresse von 192.168.0.5 dargestellt.