Vertaling van "dcc control" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
2 = MF3 is used as function switching output 1 and thus the headlight sensor connection is switched off, control of the switching output with function key F10 of a DCC control center
2 = MF3 wird als Funktionsschaltausgang 1 verwendet und damit der Fahrlicht - Sensor Anschluss ab geschaltet. Steuerung des Schaltausganges mit Funktionstaste F10 einer DCC Zentrale.
Control with function key F12 of a DCC control panel
Steuerung mit Funktionstaste F12 einer DCC-Zentrale oder Funktionsbaustein J
Operation of vehicles with a DCC control center just like the control of a digital locomotive.
Bedienung der Fahrzeuge wie eine Digitale Lok per Mausklick.
Roco has always numbered the turnouts from module address 0, whereas some other DCC control centre and decoder manufacturers start numbering at module address 1.
Roco nummeriert die Weichen seit jeher ab Moduladresse 0, einige andere DCC-Zentralen- und Decoder-Hersteller erst ab Moduladresse 1.
Technically, the "turnout address" that is visible to the user, can only be "translated" with a combination of a module address and a port address in the DCC control center and only then is it possible to apply it to the track.
Technisch wird nämlich die für den Anwender sichtbare „Weichenadresse" in der DCC-Zentrale erst in eine Kombination von Moduladresse und Portadresse „übersetzt" und dann aufs Gleis ausgegeben.
Locomotives equipped with Digital plus decoders must not be run using powered overhead line either on conventional DC control or DCC control This could subject the locomotive to double the voltage and this would destroy the decoder.
Mit Digital plus Decodern ausgerüstete Lokomotiven dürfen auf Zweileiteranlagen nicht an der Oberleitung betrieben werden, da die Lokomotive durch Aufgleisen in der falschen Richtung die doppelte Fahrspannung erhalten kann.
The WEK's Diesel engine 2095007-7 with DCC control.
Die Diesellok 2095007-7 (mit digitaler Steuerung) vor einem Rollwagenzug.
On the Sniff-BUS, "disused" DCC control centers can be connected with an output voltage starting from 16V onwards.
Am Sniff-BUS können „ausgediente" DCC-Zentralen mit einer Ausgangsspannung ab 16V angeschlossen werden.
Consequently the WEK owns two engines (so far) with DCC control, additionally fitted with sound modules (Uhlenbrock Intellisound).
So hat die WEK bisher auch zwei digital gesteuerte Loks, die zudem mit Soundmodulen (Uhlenbrock Intellisound) ausgestattet sind.
However, transferring the configured QDecoders to my live system with a Digikeijs DR5000 for DCC control, the decoders will not work at PADA 400.
Wenn Sie jedoch die konfigurierten QDecoder mit einem Digikeijs DR5000 für die DCC-Steuerung auf mein Live-System übertragen, funktionieren die Decoder bei PADA 400 nicht.