The prototyping module ES830 and the modules from the ETAS ES900 hardware family as well as different kinds of bypass technologies are supported for in-vehicle testing.
Für Fahrzeugversuche werden das Prototyping-Modul ES830, beziehungsweise die Module der ETAS-Hardware-Familie ES900 sowie verschiedenste Bypass-Technologien unterstützt.
SLSC-12101 is a prototyping module intended to help SLSC module developers quickly prototype designs.
Das SLSC-12101 ist ein Prototyping-Modul, das Entwickler von SLSC-Modulen bei der Prototyperstellung unterstützt.
ES89x modules provide signals for the computation of functions on a rapid prototyping module ES910 in real-time.
ES89x-Module stellen Signale für die Berechnung von Funktionen auf einem Rapid Prototyping Modul ES910 in Echtzeit zur Verfügung.
In INTECRIO, the ES630 and ES631 lambda modules can be connected; these provide measurement signals in real time for functions on an ES910 rapid prototyping module.
Die Prototypen können auf einem ES1000-Experimentiersystem oder einem Rapid Prototyping Modul ES910 implementiert und per ETK/XETK-Bypass mit dem Steuergerät verbunden werden.
Using RTA-TRACE, operating system task patterns and resource allocation of INTECRIO prototyping applications running on a PC, or an ES910 Rapid Prototyping Module can be accurately analyzed.
Der RTA-TRACE Logik-Analyzer ermöglicht die exakte Analyse und statistische Auswertung der Ausführungsmuster und des Ressourcenverbrauchs Prototyping Anwendungen auf einem PC oder einem Rapid Prototyping-Modul ES910.
Configured by INTECRIO, ES430, ES432, ES630, and ES631 Lambda Modules supply measurement signals to functions running on an ES910 Rapid Prototyping Module in real time.
Die Lambda Module ES430, ES432, ES630 und ES631 stellen Messsignale für Funktionen auf einem Rapid Prototyping Modul ES910 in Echtzeit zur Verfügung.
In rapid prototyping applications, INCA is able to access the ES910 Rapid Prototyping Module as well as the ES1130 and the ES1135 Simulation/System Controller Boards in parallel to ECUs.
In Rapid Prototyping-Anwendungen kann über INCA parallel zu den Steuergeräten auch auf das Rapid Prototyping Modul ES910 sowie die Simulation/System Controller Boards ES1130 und ES1135 zugegriffen werden.
INTECRIO Using INTECRIO, ECU functions based on ASCET or MATLAB/Simulink models, C code modules, or AUTOSAR software components can be prototyped with an ES1000 experimental system or an ES910 Rapid Prototyping Module and an ETK/XETK bypass.
INTECRIO unterstützt das Prototyping von Steuergerätefunktionen, die aus ASCET-, MATLAB/Simulink- und C Code Modulen oder AUTOSAR Softwarekomponenten aufgebaut sind. Die Prototypen können auf einem ES1000-Experimentiersystem oder einem Rapid Prototyping Modul ES910 implementiert und per ETK/XETK-Bypass mit dem Steuergerät verbunden werden.
The ES830 is a rapid prototyping module for function development via bypass and direct bus access.
Red Pitaya is a powerful instrumentation and prototyping module with integrated 14-bit A/D and D/A converters, which is used by numerous electronics professionals and hobbyists as a general-purpose oscilloscope, signal generator or signal analyzer.
Red Pitaya ist ein leistungsfähiges Mess- und Analysegerät, das schon von vielen Elektronikern dank der integrierten 14-bit-A/D- und D/A-Wandler als universelles Oszilloskop/Generator/Analyzer-Gerät verwendet wird.
Interaction of the ES830 prototyping module with the other ETAS components
The ETAS ES830 rapid prototyping module is a component of the ETAS prototyping solution.
Chief among these was the ES910 prototyping module, which serves as the main ECU in the eSleek4x4.
Besonders Hervorzuheben ist dabei die ES910. Sie dient beim eSleek4x4 als Hauptsteuergerät.