Vertaling van "the Set key" in Duits
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
Press the SET key until the time is blinking
In this time press the, or t key to adjust the parameter, then press the SET key to preserve.
In dieser Zeit drücken Sie die , oder t-Taste um die Parameter einzustellen, und drücken Sie dann die SET-Taste zu bewahren.
After each setting press the Set key to confirm.
Follow the above description to deactivate the function, select in step 4 and press the Set key.
Zum Ausschalten der Funktion gehen Sie vor wie oben beschrieben, wählen Sie in Schritt 4 und drücken Sie die Programmiertaste.
Press the SET key and hold it down, at the same time actuate number key "3" to display the 1st position of 3-digit code.
Drücken Sie nun noch einmal die SET Taste und halten Sie sie gedrückt, betätigen Sie zur selben Zeit die Zahlentaste „3" um die 1. Position des 3-stelligen Codes anzuzeigen.
Note: To cancel write protection, press the SET key and hold it down, and activate the "8" key at the same time, and then release the both pressed keys.
Hinweis: Um den Schreibschutz abzubrechen, drücken Sie die SET Taste und halten Sie sie gedrückt, betätigen Sie gleichzeitig die Taste "8" und lassen Sie dann beide Tasten los.
Settings 4 Press the Set key, the current setting is shown.
3 Press the Set key, the year flashes.
3 Drücken Sie die Programmiertaste, die Jahreszahl blinkt.
6 Press the Set key to confirm.
6 Drücken Sie die Programmiertaste zur Bestätigung.
Page 39 Settings 6 Set the hours using the Up key or the Down key and press the Set key - the minutes will flash.
5 Drücken Sie die Programmiertaste - die Stunden blinken. 6 Stellen Sie mit der Aufwärts-Taste bzw. der Abwärts-Taste die Stunden ein und drücken Sie die Programmiertaste - die Minuten blinken.
Press and hold the SET key for at least 1.5 seconds to exit to the normal operation mode (or simply wait 7 seconds for the meter to automatically switch to the normal operating mode).
Verwenden Sie die ENTER-Taste, um zwischen den Auswahlmöglichkeiten zu wechseln Drücken und halten Sie die SET-Taste für mindestens 1,5 Sekunden, um in den normalen Betriebsmodus zurückzukehren (oder warten Sie einfach 7 Sekunden auf die automatische Umschaltung in den normalen Betriebsmodus).
Press the SET key to read Pr. 199.
Betätigen Sie die SET-Taste, um Pr. 199 zu lesen.
94 - 98) function mode: If you reached your desire speed, press completely simply the set key at the operating sector of Magic speed.
94 - 98) Funktionsweise: Wenn Sie Ihre Wunschgeschwindigkeit erreicht haben, betätigen Sie ganz einfach die SET-Taste am Bedienteil von Magic Speed.