Vertaling van "MAX-IDE" in Japans
We konden deze vermelding niet vinden. Er worden benaderende resultaten weergegeven. Controleer je spelling of stel voor deze term aan het woordenboek toe te voegen.
The assembler and preprocessor are fully integrated with the MAX-IDE environment.
アセンブラとプリプロセッサは、MAX-IDE環境に完全に統合されています。
The latest installation package and documentation for the MAX-IDE environment are available for free download.
MAX-IDE環境の最新のインストールパッケージとドキュメントを、無償でダウンロードすることができます。
You can also locate the MAX-IDE icon and click on it.
MAX-IDEのアイコンを見つけて、それをクリックする方法もあります。
However for this application note, we will use MAX-IDE to load the program into the kit board.
しかし、このアプリケーションノートでは、MAX-IDEを使用してプログラムをキットのボードにロードします。
A more efficient approach takes advantage of MAX-IDE's mechanism to declare separate code and data segments.
より効率的なアプローチとして、独立したコードセグメントとデータセグメントを宣言するMAX-IDEのメカニズムを利用する方法があります。
However, the MAX-IDE will not actually be loaded into the kit until the program is executed.
しかし、プログラムが実行されるまで、MAX-IDEは実際にはキットにロードされません。
This type of failure can be difficult to analyze, because as soon as the device is hooked back up to the debugger, MAX-IDE will begin loading the data segment again before each run and the problem will instantly vanish.
もう一度デバイスをデバッガに接続すると、MAX-IDEは実行前のデータセグメントのロードを再開し、問題が即座に消滅してしまうため、この種の障害は分析が困難な場合があります。
However, once the device is powered off and on and allowed to run independently (with no debugger connected), MAX-IDE no longer has the ability to load the data segment with the proper values before each run.
しかし、デバイスの電源をオフ/オンした後、単独で(デバッガを接続せずに)動作させた場合、MAX-IDEは実行ごとにデータセグメントに適切な値をロードすることができなくなります。
If a MAX-IDE assembly project contains more than one assembly file, any preprocessor directives or include file directives must be contained in each assembly file that uses them.
MAX-IDEアセンブリプロジェクトに複数のアセンブリファイルが含まれる場合は、いずれのプリプロセッサ命令またはインクルードファイル命令も、この命令を使用する各アセンブリファイルに含まれていなければなりません。
Source files All assembly source (.asm) files listed in the project window of MAX-IDE will be assembled when the project is compiled, in the order in which they are shown in the window.
ソースファイル MAX-IDEのプロジェクトウィンドウに一覧表示されるすべてのアセンブリソース(.asm)ファイルは、プロジェクトをコンパイルするときに、ウィンドウに表示された順序でアセンブルされます。
The MAX-IDE will open the project and load the assembly-language source file (2000test.asm) into the display window (Figure 5).
MAX-IDEがプロジェクトをオープンして、アセンブリ言語のソースファイル(2000test.asm)をディスプレイウィンドウにロードします(図5)。
This approach allows an assembly-based application to take advantage of the data segment autoloading provided by MAX-IDE, while still operating consistently whether or not the microcontroller is connected to a JTAG debugger.
このアプローチによって、マイクロコントローラがJTAGデバッガに接続されている場合も接続されていない場合も一貫して動作する形で、MAX-IDEが提供するデータセグメントの自動ロード機能をアセンブリ言語ベースのアプリケーションで利用することが可能になります。
At run time, MAX-IDE automatically loads the code segment file into program memory (typically flash) and the data segment file into data memory (typically RAM).
実行時には、MAX-IDEが自動的にコードセグメントファイルをプログラムメモリ(通常はフラッシュ)に、データセグメントファイルをデータメモリ(通常はRAM)にロードします。