Meta keys which do not generate events are ignored even if they are set to the auto repeat target.
イベントを発生しないメタキーは自動リピートの対象とならず、自動リピート対象キーの設定は無視される。
When one key is held down and while holding down another key, only the auto repeat key event of the last pressed key generated.
1 つのキーを押し続けている状態で、さらに別のキーを押し続けた場合は、最後に押したキーの自動リピート キーイベントのみが発生する。
Auto Repeat: Display all media files in a loop automatically; 5.
自動リピート:すべてのメディアファイルをループ内に自動的に表示します。
Meta keys that do not create event are not subject to auto repeat and the setting of the auto repeat target key is ignored.
イベントを発生しないメタキーは自動リピートの対象とならず、自動リピート対象キーの設定は無視される。
The key targeted for auto repeat can be set to any keys except meta keys which generate no event key, and every key except meta keys can be the target of auto repeat at system startup.
自動リピートの対象キーはイベントを発生しないメタキーを除いて任意に設定可能であり、システム立ち上げ 時には、メタキーを除いたすべてのキーを自動リピートの対象とする。
The key corresponding to the bit of the fetched keymap "1" is the target of the auto repeat while the key corresponding to the bit of keymap "0" is not the target of the auto repeat.
取り出したキーマップの "1" のビットに対応するキーが自動リピートの対象となる 。 "0" のビットに対応する キーは自動リピートの対象ではない。
However, the recurrence interval of auto repeat key events depends on the offset time and the interval time are rounded to the unit of event occurrence time.
但し、自動リピートキーイベン トの発生間隔は実装依存であり、オフセット時間とインターバル時間は、イベント発生時刻の単位へ丸められる。
Simply select the Auto Repeat Mode and follow the on-screen prompts to ensure the highest level of measurement accuracy.
自動測定モードを選択して、画面に表示される校正手順に従うだけで、高い精度を維持できます。
Getting Rid of Auto Repeat
オートリピートのRidを取得
When used in conjunction with the Elcometer 456 Scan or Auto Repeat Modes* the Ultra/Scan Probe enables users to significantly reduce inspection times without affecting accuracy.
このプローブをElcometer 456と共にスキャンモードまたは自動測定モード で使用すると、試験時間を大幅に短縮することができます。
Auto Repeat (Interaction Modes Inc and Dec): The function will be triggered repeatedly when you hold the button on your device down.
Auto Repeat (Interaction Mode が Inc または Dec の場合に表示されます): ボタンを押している間、その動作を繰り返します。
Auto Repeat Mode In Auto Repeat Mode, as the probe slides across the surface, more than 2 readings are taken every second, with each individual reading stored in the memory of the gauge. With a reading rate in excess of 140 readings per minute the Auto Repeat Mode significantly speeds up the inspection of large areas of coatings which require the recording and analysis of individual film thickness values.
自動繰り返しモード 自動繰り返しモードでは、塗膜表面でプローブをスライドさせ、一分間に140点以上の個別の読み取り値を膜厚計に記録させることができますので、広い測定範囲で個々の測定点での膜厚の記録および解析が必要とされるような検査において、大幅に作業スピードを速めることができます。
If you set this control to Button, the Interaction Mode to Inc and then enable Auto Repeat, the cursor will scroll through the track list automatically as long as you keep the controller button pressed (no need to press the button for each step through the list).
すると、ボタンを押した時、カーソルはトラックリストを自動的にスクロールします。 (リスト内のステップ毎にボタンを押す必要はありません。