For a null modem cable the best approach is to disable handshaking in your terminal emulation software.
ヌルモデムケーブルに関しては、 使っている端末エミュレータソフトウェアで、 ハンドシェークを無効にするのが最良のやり方です。
Attach a modem, or a null modem cable and a terminal.
A null modem cable emulates modem communication.
ヌル モデム ケーブルを使う場合は、モデムによる通信は不要です。
In most cases, a direct cable connection is made with a null modem cable.
ほとんどの場合、直接ケーブル接続はヌル モデム ケーブルを使って行われます。
One-way null modem cable with no status or handshaking
ステータスもハンドシェークもない片方向のヌルモデムケーブル
The correct wiring of a null modem cable is shown in with an alternative shown in.
ヌルモデムケーブルの正しい結線は、 と、もう一つ に示してあります。
The wiring within the null modem cable depends upon the handshaking and control signals that are needed.
ヌルモデムケーブル内の結線は、 必要となるハンドシェークと制御信号によって異なります。
Unlike a null modem cable, a virtual null modem is a software solution which emulates a hardware null modem within the computer.
ヌルモデムケーブルと異なり、仮想ヌルモデムはコンピューター内でハードウェアヌルモデムをエミュレートするソフトウェアソリューションである。
Differing manufacturers have differing views on this topic, so don't buy a null modem cable that does not come with a wiring diagram.
製造業者が違えば、この点に関する見方も違います。 ですから、結線図が付属していないヌルモデムケーブルは買わないで下さい。
null modem cable, defined
ヌル モデム ケーブル, 定義
A null modem cable bought at a computer store may do it (if it's long enough), but it probably will not work for hardware flow control.
お店で買ったヌルモデムケーブルなら大丈夫でしょう (長さが十分ならば)。 しかし、ハードウェアフロー制御はうまく働かないかもしれません。
Alternatively if a terminal and a null-modem cable are used see, which discusses the pin out of the null modem cable. preparation-modem
端末とヌルモデムケーブルを使う場合は、 を見て下さい。 ここで、ヌルモデムケーブルのピン配置を論じています。
The normal "straight thru" cable will not work unless you are using it as an extension cable in conjunction with either a null modem cable or a null modem adapter.
ノーマルな 'ストレートスルー`` ケーブルは、ヌルモデムケーブルかヌルモデムアダプタと結合した延長ケーブルにしないとうまく働かないでしょう。